300-610 Exam Questions Dumps, Selling Cisco Products

300-610 Cert Guide PDF 100% Cover Real Exam Questions

NEW QUESTION # 157
Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?

• A. border gateway
• B. service gateway
• C. border leaf
• D. service leaf

Answer: A

Explanation:
The main functional component of the EVPN Multi-Site architecture is the border gateway, or BGW. BGWs separate the fabric-side (site-internal fabric) from the network that interconnects the sites (site-external DCI) and mask the site-internal VTEPs.
link:https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series- switches/white-paper-c11-739942.html

NEW QUESTION # 158
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?

• A. GPU support
• B. network speed
• C. processor count
• D. storage capacity

Answer: D

NEW QUESTION # 159
Drag and drop the configurations from the left onto the correct policies on the right.

Answer:

Explanation:

NEW QUESTION # 160
A network architect designs a high-availability architecture for the Cisco UCS Fabric Interconnects that are installed in a data center. The architecture must support clustering and redundancy.
Which architecture meets these requirements?

• A. dual connections from port L1 to L1 and one connection from port L1 to L1 with twinax cables
• B. dual connections from port L1 to L1 and one connection from port L2 to L2 with Ethernet cables
• C. dual connections from port L1 to L2 and one connection from port L2 to L1 with twinax cables
• D. dual connections from port L1 to L2 and one connection from port L2 to L1 with Ethernet cables

Answer: B

Explanation:
Reference:
ch10lvl1sec92/configuring-high-availability-clustering

NEW QUESTION # 161
Which technology enables Layer 2 extension between remote data center sites?

• A. FCIP
• B. DMVPN
• C. GRE
• D. OTV

Answer: D

Explanation:
Section: Network Design
Explanation/Reference: https://netcraftsmen.com/spanning-layer-2-between-data-centers/

NEW QUESTION # 162
A Cisco engineer is developing a custom application that can run natively in Cisco NX-OS on Nexus 9000 and Nexus 3000 platforms For the NX-SDK application to run the engineer enables the NX-SDK feature on the device Then the NX-SDK is imported into the application via an import nx_sdk_py statement. The engineer creates custom CLI commands and defines custom CLI command syntax within the sdkThread function When CLI commands originate from an NX-SDK application what class is this?

• A. postCliCb
• B. pyCmdhandler
• C. clicm.printConsole
• D. nx_sdk_pyValid-to_int

Answer: B

NEW QUESTION # 163
Refer to the exhibit. An engineer working for service provider with an employee ID: 4540:37:940 must migrate the current topology to one that will provide more speed, less latency, and support software-defined networks. The new topology requires:
- low predictable latency
- loop-free
- load balancing of traffic across multiple paths
- ability to easily increase capacity and port density
Which design topology must the engineer choose?

• A. three-tier
• B. spine-and-leaf
• C. flood-and-learn
• D. core-edge

Answer: B

NEW QUESTION # 164
A customer with a single data center wants to provide resiliency in the form of an additional hosting location. The customer's engineering team requested asynchronous replication for the primary systems. The team prefers a minimal latency between locations for data replication and they can tolerate a 4-hour MTTR period. Which architecture offers maximum business continuity in the event of a primary data center failure?

• A. new secondary data center with Layer 2 spanned between data centers 2 km away with RTT 2 ms
• B. new secondary data center with Layer 3 VXLAN spanned between data centers 2 km away with RTT 2 ms
• C. A new DR site 50 km away with RTT 5 ms
• D. new secondary data center with Layer 2 spanned between data centers 1000 km away with RTT
  10 ms

Answer: C

NEW QUESTION # 165
Which two types of service profile templates does Cisco UCS support? (Choose two.)

• A. updating
• B. connected
• C. temporary
• D. initial
• E. permanent

Answer: A,D

Explanation:
Reference: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter28.html#concept_C9D27CE2AA1245EA976DAA79F5BC6808

NEW QUESTION # 166
Refer to the exhibit.

The security team created a new security policy that requires certain types of traffic to be subject to deep packet inspection The traffic types are
* internet traffic to application servers
* internet traffic to corporate users
* partner network traffic to application servers
* partner network traffic to corporate users
Where must the next-generation firewalls be inserted to implement the new policy?

• A. one-armed insertion from the ACl border leaf cluster
• B. one-armed insertion from the core switch cluster
• C. inline insertion between the user network switch cluster and the core cluster
• D. inline insertion between the edge router duster and the core switch duster

Answer: A

NEW QUESTION # 167
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
- All traffic must pass over the upstream device for switching and
domain IDs must be preserved in the fabric.
- Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?

• A. switch
• B. Fibre Channel
• C. NPIV
• D. end host

Answer: A

NEW QUESTION # 168
An organization deploys Cisco UCS-X Series servers in the data center. The deployment must have optimal BIOS configuration to maximize performance for memory-intensive applications.
The organization must set the BIOS options to achieve low-latency operation and enhanced memory bandwidth. Which BIOS tuning option on Cisco UCS-X Series servers is needed for memory-intensive workloads?

• A. Configure "Virtualization Extensions" to improve performance for hypervisor-based environments.
• B. Enable "Processor C-States" for better power efficiency during high-performance workloads.
• C. Disable "Turbo Boost" to stabilize performance and reduce heat generation.
• D. Set "NUMA Optimization" to enhance memory locality for latency-sensitive applications.

Answer: D

Explanation:
NUMA Optimization ensures that memory allocations stay local to the CPU socket that's running the workload, minimizing cross-socket memory access and thus reducing latency while maximizing effective memory bandwidth - ideal for memory-intensive, low-latency applications.

NEW QUESTION # 169
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer
2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?

• A. L2TPv2
• B. MACsec
• C. L2TPv3
• D. IPsec

Answer: B

Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Security/MACsec/WP-High-Speed-WAN-Encrypt-MACsec.pdf

NEW QUESTION # 170
Refer to the exhibit. Fiber links are provisioned directly between the spine and leaf switches in the given LAN topology. A /30 prefix has been configured over each fiber link to provide underlay connectivity for a VXLAN network. The network-engineering team must update the network configuration to provide the shortest possible convergence time if a fiber link is cut.
Which action must the team take to meet the requirement?

• A. Enable UDLD on the G0 links
• B. Enable BFD on the /30 links
• C. Configure ECMP on the /30 links
• D. Configure the /30 links as OSPF point-to-point networks

Answer: B

NEW QUESTION # 171
An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:
- The customer's security requirements mandate the use of a secure
management mechanism that supports authentication and encryption.
- The port should support management over IP.
Which port type must be used to meet these requirements?

• A. connectivity management port
• B. management port
• C. Ethernet port
• D. console port

Answer: B

NEW QUESTION # 172
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS С-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements:
Provide multipathing and high availability in the event of a critical path failure.
Be cost-effective and not require the purchase of new equipment.
Which two components must be selected to meet these requirements? (Choose two.)

• A. uplink pinning
• B. hardware iSCSI NIC
• C. software iSCSI adapter
• D. system VLAN
• E. storage binding

Answer: C,E

NEW QUESTION # 173
Which two automation requirements can be met by using Puppet? (Choose two.)

• A. Push configuration updates immediately to servers.
• B. Enable clients to pull changes to configuration files.
• C. Enable one-off infrastructure changes to be performed manually.
• D. Provide support for writing new modules in Python.
• E. Enable clients to pull changes without installing an agent.

Answer: A,B

Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series- rack-servers/whitepaper_c11-740103.pdf

NEW QUESTION # 174
DRAG DROP
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Select and Place:

Answer:

Explanation:

Section: Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/ configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/ creating-vdc.html

NEW QUESTION # 175
The network infrastructure team is beginning to automate routine tasks within the Cisco ACI fabric and is searching for the appropriate solution. The solution must not require any additional software installed on the Cisco APIC Networking team members lack automation experience and prefer to use a tool that does not require in-depth programming knowledge. Finally configuration within the Cisco ACI fabric is rarely modified or removed.
Which solution must the team choose?

• A. Terraform
• B. Ansible
• C. Puppet
• D. Cobra SDK

Answer: D

NEW QUESTION # 176
Drag and Drop Question
Drag and drop the configurations from the left onto the correct policies on the right.

Answer:

Explanation:

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-
2/b_UCSM_GUI_Configuration_Guide_2_2/
configuring_network_related_policies.html#task_7F03A03C719A4A44B8ACFAD73AADC73C

NEW QUESTION # 177
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines.
The operational complexity continues to grow with additional policies and servers added to the environment.
An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?

• A. NSO
• B. Saltstack
• C. Puppet
• D. Ansible

Answer: D

NEW QUESTION # 178
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

Answer:

Explanation:

NEW QUESTION # 179
Refer to the exhibit.

An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)

• A. Smart Zoning feature on the Cisco UCS Fabric Interconnects
• B. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
• C. NPIV feature on the Cisco MDS Series
• D. NPV feature on the Cisco MDS Series.
• E. end-host mode feature on the Cisco UCS Fabric Interconnects

Answer: C,D

NEW QUESTION # 180
A network engineer designs a virtual network in a Cisco UCS Manager. The traffic must be explicitly forwarded from the vNIC on the server to a specific uplink Ethernet port on the Cisco fabric interconnect. Also, the server vNIC must use the same uplink Ethernet port after reboot. Finally, the design requires a OoS policy for remote direct memory access over converged Ethernet (RoCE v2). Which set of design features meets these requirements?

• A. vNIC pool and Silver priority
• B. LAN pin group and Platinum priority
• C. server VLAN pool and Gold priority
• D. vNIC template and Gold priority

Answer: B

NEW QUESTION # 181
......

Pass 300-610 Exam - Real Questions and Answers: https://www.braindumpsit.com/300-610_real-exam.html

Pass 300-610 Review Guide, Reliable 300-610 Test Engine: https://drive.google.com/open?id=1ayzdJcr5ISKzyFQitzVv187ADpY9FZZB