BEST Verified HP HPE6-A73 Exam Questions (2023) 

The Best Practice Test Preparation for the HPE6-A73 Certification Exam

NEW QUESTION 63
Examine the network exhibit:

The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)

• A. Server 1 to Client 1
• B. Client 3 to Client 2
• C. Client 1 to Client 2
• D. Client 1 to Client 3
• E. Server 2 to Client 2

Answer: A,C

 

NEW QUESTION 64
An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature'?

• A. Provides surge protection for PoE and non-PoE ports
• B. Provides up to 60W of power per port
• C. Supports all AOS-CX switches
• D. Requires NetEdit to implement

Answer: B

 

NEW QUESTION 65
Examine the configuration performed on newly deployed AOS-CX switches:

After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?

• A. Enable change of authorization (CoA)
• B. Set the ports to client-mode
• C. Create and assign a local user role to the ports
• D. Define the server group cppm

Answer: A

 

NEW QUESTION 66
Examine the following AOS-CX switch configuration:

Which statement correctly describes what is allowed for traffic entering interface 1/1/3?

• A. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
• B. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
• C. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
• D. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23

Answer: A

Explanation:
People seem to be confused by inverted mask/wildcard masks. They would be correct for Cisco switches, but AOS-CX does NOT use wildcard masks; "AOX-CX switches do not support wildcard masks - only prefixes or subnet masks - when created ACEs." Cisco: 255.0.255.0 = xx.123.xx.123 AOS-CX: 255.0.255.0 = 123.xx.123.xx

 

NEW QUESTION 67
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?

• A. Define the account to implement downloadable user roles
• B. Define the account to implement change of authorization
• C. Speed up the AAA authentication process
• D. Implement replay protection for AAA messages

Answer: B

Explanation:
Explanation
https://techhub.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/16-01/5200-
0122_access_security_guide/content/ch09s02.html

 

NEW QUESTION 68
How should a network administrator add NAE scripts and implement NAE agents that will run on an AOS-CX switch?

• A. Use the web interface of the NetEdit server
• B. Use the CLI of the AOS-CX switch
• C. Use the web interface of the AOS-CX switch
• D. Use the web interface of Aruba Central.

Answer: C

 

NEW QUESTION 69
A company is implementing AOS-CX switches at the access layer. The company wants to implement access control for employees and guests.
Which security features will require a ClearPass server to be installed and used by the company?

• A. Change of authorization (CoA)
• B. User-based tunneling (UBT)
• C. Dynamic segmentation
• D. Downloadable user roles

Answer: D

 

NEW QUESTION 70
Examine the commands entered on an AOS-CX switch:

What is true regarding this configuration for traffic received on interface 100?

• A. The default next-hop address supersedes the two preceding next-hop addresses.
• B. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.
• C. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.
• D. The traffic is always dropped if the next-hop addresses are unreachable.

Answer: A

 

NEW QUESTION 71
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server.The administrator needs to examine the packets over a period of time from their desktop, however, the administrator is not directly connected to the AOS-CX switchinvolved with the traffic flow.What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Select two)

• A. On the source AOS-CX switch, the destination specified is the administrators desktop
• B. On the source AOS-CX switch, the destination specified is the switch to which the administrators desktop is connected.
• C. The encapsulation protocol used is VXLAN
• D. The encapsulation protocol is UDP
• E. The encapsulation protocol used is GRE

Answer: B,E

 

NEW QUESTION 72
An administrator of a company has concerns about upgrading the access layer switches The users rely heavily on wireless and VoIP telephony Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?

• A. Implement VSF on the AOS-CX access switches
• B. Install the in-service software upgrade (ISSU) feature with clustering enabled
• C. Implement VSX on the AOS-CX access switches
• D. install AOS-CX 6300 or 6400 switches with always-on POE.

Answer: D

 

NEW QUESTION 73
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D

• A. Implement graceful restart
• B. Implement bidirectional forwarding detection (BFD)
• C. Implement route aggregation
• D. Reduce the hello and dead interval timers

Answer: C

 

NEW QUESTION 74
Examine the following AOS-CX configuration:

Based on this configuration, which statement is correct regarding IoT traffic?

• A. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
• B. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
• C. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
• D. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch

Answer: C

 

NEW QUESTION 75
The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)

• A. Transfer files between the switch and your mobile device.
• B. Use NetEdit to manage switch configuration.
• C. Create a stack of AOS-CX switches.
• D. Securely access the switch using SSH.
• E. Schedule an operating system upgrade.

Answer: A,C

Explanation:
ACSP Study Guide Page 66 - Key Features (Transfer files between the switch and your mobile device)

 

NEW QUESTION 76
An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.
Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?

• A. Dynamic segmentation
• B. Device profiles
• C. Voice VLANs
• D. Change of authorization

Answer: A

 

NEW QUESTION 77
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?

• A. Supports only port-based tunneling
• B. Uses IPSec to protect the management traffic
• C. Uses the same management protocol as Aruba APs
• D. Uses IPSec to protect the management and data traffic

Answer: A

 

NEW QUESTION 78
Examine the network exhibit.

A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?

• A. User-based tunneling (UBT)
• B. OSPF route maps using the "set metric" command
• C. Classifier policies
• D. Policy-based routing (PBR)

Answer: D

 

NEW QUESTION 79
What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches?

• A. Controller authentication and port-based tunneling of the voice traffic
• B. Switch authentication and user-based tunneling of the voice traffic
• C. Controller authentication and user-based tunneling of the voice traffic
• D. Switch authentication and local forwarding of the voice traffic

Answer: D

 

NEW QUESTION 80
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?

• A. AOS-CX 6400
• B. AOS-CX 6300
• C. AOS-CX 8400
• D. AOS-CX 8325

Answer: A

 

NEW QUESTION 81
What would prevent two OSPF routers from forming an adjacency? (Select two.)

• A. Different MTU sizes
• B. Different IP addresses
• C. Different priorities
• D. Different router IDs
• E. Different area types

Answer: A,E

 

NEW QUESTION 82
What is the purpose of the transit VLAN when implementing dynamic segmentation policies involving AOS-CX switches and an Aruba gateway solution?

• A. It identifies the VLAN that the user traffic will be assigned to, whether the traffic is tunneled or locally switched
• B. It defines the VXLAN identifier to identified UBT traffic between the AOS-CX switches and the gateway solution
• C. It identifies the VLAN that the switch will use when tunneling the traffic to the gateway
• D. It identifies the VLAN that the user traffic will be assigned to when it comes out of the tunnel and is forwarded by the gateway.

Answer: C

 

NEW QUESTION 83
An administrator wants to implement a virtual switching technology that implements a single control-plane solution. Which S-CX switches would meet these criteria?

• A. AOS-CX 6300, 6400, and 83xx switches
• B. All AOS-CX switching platforms
• C. AOS-CX 6300 and 6400 switches
• D. AOS-CX 6300 switches

Answer: A

 

NEW QUESTION 84
Examine the following AOS-CX configuration:

Based on this configuration, which statement is correct regarding loT traffic'?

• A. The next hop of 10 100 1.2 can be one or more hops away from the AOS-CX switch.
• B. If 10.100.1.2 is not reachable the loT traffic will be automatically dropped by the switch
• C. All routes are ignored in the routing table for loT traffic, which is routed to 10 100 1 2.
• D. If a specific route is not available in the routing table the traffic will be routed to 10 100 1.2

Answer: B

 

NEW QUESTION 85
Examine the following AOS-CX configuration:

Based on this configuration, which statement is correct regarding IoT traffic?

• A. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
• B. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
• C. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
• D. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch

Answer: C

 

NEW QUESTION 86
......

What is the cost of Hewlett Packard Enterprise Aruba Certified Switching Professional Exam

The cost of Hewlett Packard Enterprise Aruba Certified Switching Professional Examis $300.

• Length of Examination: 140 minutes
• Format: Multiple choices, various answers
• Number of Questions: 120

 

HPE6-A73 Exam Dumps, Practice Test Questions BUNDLE PACK: https://www.braindumpsit.com/HPE6-A73_real-exam.html

Aruba Certified Switching Professional (ACSP) V1 Certification HPE6-A73 Sample Questions Reliable: https://drive.google.com/open?id=1MEWetiEa3JL2uU8HqxnZZCVaovoe14hD