[Dec 07, 2021] Prepare For The VCS-278 Question Papers In Advance
VCS-278 PDF Dumps Real 2021 Recently Updated Questions
Veritas NetBackup Administration Exam Certification Details:
| Passing Score | 65% |
| Exam Price | $225 (USD) |
| Exam Name | Veritas Certified Specialist (VCS) - NetBackup |
| Number of Questions | 75 - 85 |
| Exam Code | VCS-278 |
| Sample Questions | Veritas NetBackup Administration Sample Questions |
| Duration | 105 mins |
| Schedule Exam | Pearson VUE |
NEW QUESTION 75
Which security algorithms are used for MSDP in NetBackup 8.1.2?
- A. Blowfish encryption and SHA-2 fingerprinting
- B. Blowfish encryption and MD5 fingerprinting
- C. AES encryption and MD5 fingerprinting
- D. AES encryption and SHA-2 fingerprinting
Answer: D
NEW QUESTION 76
Which statement is false about NetBackup deduplication?
- A. Fingerprinting of data can be performed on the server side as well as the client side.
- B. Deduplication can be performed at the disk block level.
- C. Media server deduplication has only been available since NetBackup 7.0.
- D. Deduplication uses a capacity-based license.
Answer: B
Explanation:
Explanation
Deduplication can be performed at the file and sub-file or segment level.
NEW QUESTION 77
An administrator needs to back up Windows and Linux file servers to an Advanced Disk storage unit targeting a high speed disk array. Backup traffic shares a busy network with mission critical application traffic.
Which feature can the administrator implement to optimize this backup environment?
- A. NetBackup Accelerator
- B. Synthetic backups
- C. client-side deduplication
- D. network resiliency
Answer: B
Explanation:
Explanation/Reference: https://searchdatabackup.techtarget.com/feature/Full-incremental-or-differential-How-to-choose- the-correct-backup-type
NEW QUESTION 78
An administrator is working with a Linux media server and has received a status code 80 with the following error message:
Media Manager device daemon (ltid) is not active
After attempting to start the daemon ltid manually, the administrator continues to receive the same error.
Which configuration file should the administrator change to enable VERBOSE level to this daemon (ltid)?
- A. emm.conf
- B. bp.conf
- C. st.conf
- D. vm.conf
Answer: D
Explanation:
Explanation/Reference: https://www.veritas.com/support/en_US/doc/86063237-127664549-0/v28993834-127664549
NEW QUESTION 79
Which statement best describes the nbcplogs utility?
- A. It copies NetBackup logs to the OpsCenter server.
- B. It collects a variety of log files.
- C. It makes backup copies of NetBackup logs.
- D. It compresses NetBackup log files.
Answer: B
Explanation:
The nbcplogs utility collects a variety of log files.
NEW QUESTION 80
A NetBackup policy is configured to back up the following paths for a client:
D:\stage
E:\data
E:\home
F:\production
Multistreaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.
Which step should the administrator consider to improve backup performance?
- A. increase the multiplexing level
- B. back up only one stream from each physical device on the client
- C. increase the number of data buffers
- D. disable multistreaming
Answer: B
NEW QUESTION 81
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below:
Media Server showing offline
Which command can the administrator run to status of the media server?
- A. Nbemmcmd
- B. Nbdb-admin
- C. Bptesbped
- D. bpminilicense
Answer: C
NEW QUESTION 82
An administrator is comparing the NetBackup Accelerator and NetBackup FlashBackup features to determine which feature should be used for backup of a very large file system with millions of files.
Which consideration is irrelevant when determining whether to use NetBackup Accelerator or NetBackup FlashBackup in the situation?
- A. the file system storage capacity.
- B. the file system folder depth.
- C. the type of file system being used.
- D. the file system change rate.
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 83
Refer to the exhibit.
A backup policy uses a Full backup schedule with a schedule type of Frequency: 1 day. The Exclude Dates tab is configured to exclude all Thursdays for the next few weeks. The start window for the schedule is configured as shown in the exhibit:
The administrator runs a manual backup at 10:00 on Wednesday.
When will the next backup run, if all prior backups completed successfully?
- A. Friday at 10:00
- B. Friday at 2:00
- C. Thursday at 10:00
- D. Thursday at 2:00
Answer: B
NEW QUESTION 84
Which command should an administrator run to display all images written to both disk and tape for a particular client?
- A. bpimmedia
- B. bplist
- C. bpstulist
- D. bpimage
Answer: A
NEW QUESTION 85
The Activity Monitor shows a failed job. Which method is easiest to troubleshoot the error code?
- A. Click the status code link in the job's Detailed Status report.
- B. Go to www.veritas.com/support.
- C. Look up the error code in the NetBackup Status Codes Reference Guide.
- D. Run a problems report.
Answer: A
NEW QUESTION 86
A NetBackup policy is configured to back up the following paths for a client:
Multi-streaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.
Which step should the administrator consider to improve backup performance?
- A. increase the number of data buffers.
- B. disable multistreaming.
- C. increase the multiplexing level.
- D. back up only one stream from each physical device on the client.
Answer: D
NEW QUESTION 87
Which command should an administrator run to display all images written to both disk and tape for a particular client?
- A. bpimmedia
bpmedia - B. bpclntcmd
- C. bplist
Answer: A
NEW QUESTION 88
Backup jobs end with the following series of messages in the Job Details:
Which process is failing to respond?
- A. nbjm
- B. bpbrm
- C. bpdbm
- D. nbemm
Answer: C
NEW QUESTION 89
An administrator has a MS-Windows type policy that has failed for a Microsoft Windows NetBackup client.
The policy uses the ALL_LOCAL_DRIVES backup selection. See the extract from the end of the job details below:
Which two logs will provide the most relevant information for troubleshooting and resolving the error?
(Choose two.)
- A. Operating system logs on the client
- B. NetBackup bptm logs on the media server
- C. NetBackup bpfis logs on the client
- D. NetBackup bpfis logs on the media server
- E. Operating system logs on the media server
Answer: A,C
NEW QUESTION 90
Which step must an administrator complete prior to configuring a new MBU-Catalog policy?
- A. Set up a Vault Policy for Catalog backup
- B. Set an encryption passphrase for disaster recovery packages
- C. Log in a as the System Administrator
- D. Create an email alias for recovery purposes
Answer: B
Explanation:
Explanation
https://www.veritas.com/content/support/en_US/article.100040029.html
NEW QUESTION 91
When configuring a NBU-Catalog policy type, you must use a volume pool configured as a catalog backup pool.
- A. True
- B. False
Answer: A
Explanation:
Any NBU-Catalog policy type, where the backup destination goes to a Media Manager storage unit (tape), must use a volume pool configured as a catalog backup pool.
NEW QUESTION 92
Refer to the exhibit.
A backup policy uses a Full Backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:
The administrator runs a manual backup at 10:00 on Thursday.
When would the next backup run, if all prior backups completed successfully?
- A. Monday at 2:00
- B. Friday at 10:00
- C. Friday at 2:00
- D. Monday at 10:00
Answer: C
NEW QUESTION 93
To which VMware component does the backup host require direct access for SAN backups?
- A. vCenter server
- B. vStorage API
- C. VMware tools
- D. Datastore
Answer: D
Explanation:
Explanation
The datastore contains virtual machine data for the ESXi Servers.
NEW QUESTION 94
An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.
What is preventing the administrator from suspending the job?
- A. Checkpoint restart is disabled
- B. the parent job is still active
- C. child jobs are still active
- D. Multiplexing is enabled
Answer: A
Explanation:
NEW QUESTION 95
Where in the Backup, Archive, and Restore interface on a Microsoft Windows Client would an administrator define the source client for a restore job?
- A. Select for Restore > Restore from Normal Backup
- B. File > Specify NetBackup Machines and Policy Type
- C. File > NetBackup Client Properties > Host Properties
- D. File > NetBackup Client Properties > General
Answer: A
NEW QUESTION 96
......
Veritas VCS-278 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Configure NetBackup 8.1.2 | -Describe how to configure various master/media/client settings and host properties using the NetBackup administration console. -Describe how to configure removable media (tape), volume pools, volume groups, and media manager storage units. -Describe how to configure disk and cloud storage, storage units, and storage unit groups. -Describe how to configure and utilize backup policies. -Explain how to implement specialized backup solutions including synthetic backups, True Image Restore (TIR), multiple data streams, checkpoint restart, and the use of backup duplication solutions such as disk staging, Storage Lifecycle Policies, Auto Image Replication, and NetBackup Accelerator. -Describe the function, uses, configuration, and administration of the NetBackup deduplication options, such as media server deduplication, client-side deduplication, optimized duplication, and storage servers. -Describe how to perform catalog backup configuration tasks. |
| Monitor and Maintain NetBackup 8.1.2 | -Describe how to manage tape devices and tape media. -Describe image management concepts and how to use the NetBackup administration console to verify, expire, import, and manually duplicate backup images. -Describe how to manage NetBackup disk and cloud storage. -Interpret available reports to verify and monitor NetBackup. -Describe how and when to prioritize, cancel, suspend, resume, restart, retry or manually run backup and duplication jobs. -Describe how to initiate, prioritize, and monitor NetBackup restore jobs. -Describe how to manage NetBackup Security (e.g., RBAC, host certificates). -Describe how to install client updates (e.g., VxUpdate). |
| Troubleshoot NetBackup 8.1.2 | -Interpret status codes and job details in order to diagnose and troubleshoot failed jobs. -Troubleshoot devices and media, including connectivity between master, media, and client. -Troubleshoot common issues related to NetBackup disaster recovery including recovering the NetBackup catalog. |
| Tune NetBackup 8.1.2 | -Analyze, optimize, and tune NetBackup. |
VCS-278 Dumps and Practice Test (220 Exam Questions): https://www.braindumpsit.com/VCS-278_real-exam.html