Feb 06, 2026 Updated EUNA_2024 Dumps Questions For Esri Exam

Best Value Available Preparation Guide for EUNA_2024 Exam

NEW QUESTION # 43
When configuring a partitioned tier definition in ArcGIS Utility Network, what type of terminal configuration must be used to properly define flow direction?

• A. Bidirectional
• B. Single Terminal
• C. Directional

Answer: C

Explanation:
Partitioned tiers requiredirectional terminals, since they model sequential flow from higher to lower tiers.

NEW QUESTION # 44
A utility company wants to represent a transformer mounted on a power pole in ArcGIS Pro. Which type of association should be configured?

• A. Structural attachment association
• B. Connectivity association
• C. Containment association

Answer: A

Explanation:
Structural attachmentsmodel domain features (transformers) attached to structures (power poles).

NEW QUESTION # 45
A field technician is using ArcGIS Field Maps with a published utility network. Which two actions are supported in Field Maps when interacting with the network?

• A. View associations and perform traces
• B. Apply validation rules and create subnetworks
• C. Offline editing and schema changes

Answer: A

Explanation:
In Field Maps, users canview associationsandrun traces. Offline editing workflows are not supported.

NEW QUESTION # 46
When creating association roles in ArcGIS Utility Network, what would an unspecified deletion semantic allow if a user attempts to delete a structure feature?

• A. Allows deletion of the structure while keeping associated network features in place
• B. Prevents deletion of the structure until all associated features are removed
• C. Automatically deletes all associated features along with the structure

Answer: A

Explanation:
Unspecified deletion semantic removes associations but leaves network features intact when the container or structure is deleted.

NEW QUESTION # 47
On the side of a device where a subnetwork originates, which terminal setting must be used to correctly define the flow path?

• A. Load
• B. Default
• C. Source

Answer: A

Explanation:
TheLoadsetting indicates the terminal where the subnetwork originates, establishing valid directionality.

NEW QUESTION # 48
In ArcGIS Utility Network, which concept defines the relative position of tiers and controls the trace order when multiple tiers exist?

• A. Subnetwork controller
• B. Network category
• C. Tier rank

Answer: C

Explanation:
Tier rank defines relative tier position. Rank 1 is the highest, and it controls the order of subnetwork tracing.

NEW QUESTION # 49
A GIS analyst encounters error code 8: "Invalid Connectivity - No junction edge rule." What does this mean, and how should it be fixed?

• A. Subnetwork overlap; fix by redefining tiers
• B. Point snapped to a line without valid rule; fix by adding rule or correcting asset group/type
• C. Invalid terminal; fix using terminal connection tool

Answer: B

Explanation:
Error 8 occurs when a point is connected to a line with no valid junction rule. Fix by adding a rule or correcting the data.

NEW QUESTION # 50
Which terminal configurations are permitted in hierarchical tier definitions within ArcGIS Utility Network?

• A. Directional or bidirectional
• B. Single terminal only
• C. Directional only

Answer: A

Explanation:
Hierarchical tiers allowdirectionalorbidirectionalterminals to support nested flow modeling.

NEW QUESTION # 51
When configuring valves or switches in ArcGIS Utility Network, are terminals necessary if both sides of the device are equal?

• A. No, terminals are only required if the device is a subnetwork controller
• B. No, terminals are only required when sides differ, multiple ports exist, or flow is directional
• C. Yes, all devices must have terminals

Answer: B

Explanation:
If both sides of a device are identical, terminals are unnecessary. Terminals are used when sides differ or multiple ports exist.

NEW QUESTION # 52
Which attribute rule type should be used if you want an attribute to be automatically populated after a feature is added or updated in ArcGIS Pro?

• A. Constraint rule
• B. Validation rule
• C. Immediate calculation rule

Answer: C

Explanation:
Immediate calculation rulesrun instantly after edits to populate attributes automatically.

NEW QUESTION # 53
A utility engineer is modeling a power system in ArcGIS Pro and needs to attach a transformer bank to a power pole. Which type of association should be used?

• A. Structural attachment association
• B. Connectivity association
• C. Containment association

Answer: A

Explanation:
Structural attachment associations attach domain network features (e.g., transformer bank) to structure features (e.g., power pole).

NEW QUESTION # 54
In ArcGIS Utility Network, some networks are organized so that resources flow directly outward or inward from a subnetwork controller in a single direction. Which topology tier type represents this kind of flow pattern?

• A. Partitioned topology
• B. Mesh topology
• C. Radial topology

Answer: C

Explanation:
Radial topologyradiates flow upstream or downstream from a subnetwork controller. This is typical for electric and telecom networks.

NEW QUESTION # 55
In ArcGIS Utility Network, which property is derived from feature class attributes, cached in the topology, and used to speed up tracing and analysis?

• A. Network attributes
• B. Asset types
• C. Subnetwork controllers

Answer: A

Explanation:
Network attributesare cached to make tracing and subnetwork evaluation more efficient.

NEW QUESTION # 56
In ArcGIS Utility Network, connectivity is governed by specific properties that define which features can connect to each other and how. Which set of properties defines valid connectivity in the network?

• A. Edge connectivity, association roles, and network rules
• B. Containment associations, subnetwork controllers, and categories
• C. Asset groups, network categories, and terminals

Answer: A

Explanation:
Connectivity is defined byedge connectivity,association roles, andnetwork rules. Together, these ensure only valid feature connections are allowed.

NEW QUESTION # 57
While modeling utility assets, coincident point placement is not always valid. Which of the following scenarios does ArcGIS Utility Network explicitly restrict for coincident points?

• A. Junction class to Structure class
• B. Device class to Structure class
• C. Junction class to Junction class

Answer: C

Explanation:
Coincident points are not allowed between junction-junction, junction-device, or device-device classes.

NEW QUESTION # 58
A GIS analyst encounters error code 9: "Invalid Connectivity - More than one junction edge rule applicable." What does this mean, and how should it be corrected?

• A. A device with terminals matches more than one rule; fix by removing invalid rules or specifying the correct terminal connection
• B. Duplicate device features; fix by merging duplicates
• C. Subnetwork definition conflict; fix by recalculating tiers

Answer: A

Explanation:
Error 9 occurs when multiple rules apply to the same terminal-device connection. Fix with the Terminal Connections tool or by removing invalid rules.

NEW QUESTION # 59
During a data migration, a GIS analyst encounters error code 23: "The subtype or the discriminator are out of range or the combination is invalid." What does this indicate, and how can it be resolved?

• A. Invalid terminal configuration; fix by terminal connection tool
• B. Overlapping subnetworks; fix by changing tier ranks
• C. Asset group or asset type values are outside the permitted domain; fix by correcting values

Answer: C

Explanation:
Error 23 means an asset group/type field contains values outside the valid range. Fix by correcting to recognized domain codes.

NEW QUESTION # 60
In tracing workflows, which network property provides a tagging mechanism to define criteria for stopping a trace?

• A. Network categories
• B. Asset groups
• C. Terminals

Answer: A

Explanation:
Network categoriestag features (e.g., controllers, valves) that can stop a trace when encountered.

NEW QUESTION # 61
......

Full EUNA_2024 Practice Test and 78 Unique Questions, Get it Now!: https://www.braindumpsit.com/EUNA_2024_real-exam.html

The Best EUNA_2024 Exam Study Material Premium Files  and Preparation Tool: https://drive.google.com/open?id=1ppUBu_xN5Lkf32V3p7UYBvAEnL_96Awz