Get Started: MB-310 Exam [2025] Dumps Microsoft PDF Questions

MB-310 Premium Exam Engine pdf Download

Step 2: Go through the official course outline

After reviewing the exam details, you need to ensure that you are staying up-to-date with the entire course outline. It is worth mentioning that it is usually the most important part of the certification test. So, you should go to the Microsoft site and review the course outline.

 

NEW QUESTION # 116
A rental service company with complex accrual requirements has accrual schemes set up in its implementation. They want to use defined accrual schemes to perform transactions.
You need to use an accrual scheme to create transactions for this company.
Which actions should you perform? To answer, select the appropriate configuration in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 117
A client has one legal entity and the following four dimensions configured: Business Unit, Cost Center, Department, and Division.
You need to configure the client's system to run the trial balance inquiry in the General ledger module so that it displays the trial balance two ways:
* Include the main account and all four dimensions.
* Include the main account and only the business unit and cost center dimensions.
What should you configure?

• A. two financial dimension sets
• B. two derived financial dimension hierarchies
• C. all financial dimensions by using the group dimension functionality
• D. two account structures

Answer: A

Explanation:
Section: Manage and apply common processes

NEW QUESTION # 118
You Create a financial dimension set named MA + DEPT+PROJ as shown in the following screenshot. The financial dimension set include the following dimensions:
* Main Account
* Department
* Project

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 119
You are a functional consultant for Contoso Entertainment System USA (USMF).
USMF plans to implement a new manufacturing department that will be based in Australia.
You need to create a draft account structure for the new department. The account structure must use the same account structure as a department named Manufacturing India and be named Manufacturing Australia.
To complete this task, sign in to the Dynamics 365 portal.

Answer:

Explanation:
See explanation below.
Explanation:
You need to create an account structure with the same structure as the department named Manufacturing India by using the following instructions.
* Go to Navigation pane > Modules > General ledger > Chart of accounts > Structures > Configure account structures.
* On the Action pane, click New to open the drop dialog.
* In the Account structure field, type a name to describe the purpose of the account structure.
* In the Description field, type a description to specify the purpose of the account structure.
* Click Create.
* In the Segments and allowed values, click Add segment.
* In the dimensions list, select the dimension to add to the account structure.
* At the end of the list, click Add segment.
* Repeat step 6 to 9 as needed.
* In the Allowed value details section, select the segment to edit the allowed values. For example, click the Main Account field.
* In the Operator field, select an option, such as is between and includes.
* In the Value field, type a value. For example, 600000.
* In the through field, type a value. For example, 699999.
* In the Allowed value details section, click Apply.
* Repeat step 10 to 15 as needed.
* In the Allowed value details section, click Add new criteria.
* In the Operator field, select an option, such as is between and includes.
* In the Value field, type a value. For example, 033.
* In the through field, type a value. For example, 034.
* Click Apply.
* In the grid, select the segment to edit the allowed values. For example, Cost Center.
* In the CostCenter field, type a value. For example, 007..021.
* In the Segments and allowed values, click Add.
* In the MainAccount field, type a value. For example, 600000..699999
* In the grid, select the segment to edit the allowed values. For example, Department.
* In the Department field, type a value. For example, 032.
* In the CostCenter field, type a value. For example, 086.
* On the Action pane, click Validate.
Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/general-ledger/tasks/create-account-structures

NEW QUESTION # 120
A company is implementing Dynamics 365 Finance.
The company needs the ability to handle deferring revenue, reallocations, revenue schedules, and milestone- based recognition.
You need to configure the functionality.
What should you do? To answer, drag the appropriate functionality to the correct requirement. Each functionality may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:

NEW QUESTION # 121
You need to adjust the sales tax configuration to resolve the issue for User3.
What should you do?

• A. Create multiple settlement periods and assign them to the US tax vendor.
• B. Create multiple sales tax remittance vendors and assign them to the settlement period.
• C. Run the payment proposal to generate the sales tax liability payments.
• D. Create a state-specific settlement period and assign the US tax vendor to the settlement period.

Answer: D

Explanation:
Explanation/Reference:
Manage and apply common processes
Question Set 1

NEW QUESTION # 122
A customer plans to implement invoice validation policies.
You need to recommend the features needed to meet each of the customer's requirements.
What should you recommend? To answer, drag the appropriate features to the correct requirements. Each feature may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/accounts-payable/tasks/set-up-accounts-payable-invoice-

NEW QUESTION # 123
You manage customer credit and collections in a Dynamics 365 Finance implementation.
At the beginning of each month, you must send collection letters to customers whose payments are overdue.
You need to configure the collection letter functionality.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

1 - Define the collection letter sequence.
2 - Link the collection letter sequence to a customer posting profile.
3 - Post the collection letter.
4 - Generate the collection letter.

NEW QUESTION # 124
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A client has multiple legal entities set up in Dynamics 365 Finance. All companies and data reside in Dynamics 365 Finance.
The client currently uses a separate reporting tool to perform their financial consolidation and eliminations. They want to use Dynamics 365 Finance instead.
You need to configure the system and correctly perform eliminations.
Solution: Select Consolidate online in Dynamics 365 Finance. Include eliminations during the process or as a proposal. Set up the transactions to post in the legal entity configured for consolidations.
Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/budgeting/consolidation-elimination-overview

NEW QUESTION # 125
You are implementing Dynamics 365 Finance. A new product is being released.
The system must track the probability of the new product by cost center and you must use the cost control workspace.
You need to configure the system.
Which option should you use? To answer, drag the appropriate option to the correct requirement. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
Graphical user interface, application Description automatically generated

Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/cost-accounting/terms-cost-accounting

NEW QUESTION # 126
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A customer uses Dynamics 365 Finance.
notices incorrect postings to the ledger entered via journal.
The system must enforce the following:
Expense accounts (6000-6998) require department, division, and project with all transactions. Customer dimension is optional.
Revenue accounts (4000-4999) require department and division and allow project and customer dimensions.
Liability accounts (2000-2999) should not have any dimensions posted.
Expense account (6999) requires department, division, project and customer dimensions with all transactions.
You need to configure the account structure to meet the requirements.
Solution:
Configure one account structure with department, division, project and customer dimensions.
Configure asterisks in all columns for Expense accounts (6000-6999), Revenue accounts (4000-4999), and Liability accounts (2000-2999).
Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
As asterisk in all dimension columns would mean that a value must be configured for all dimensions.
Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/general-ledger/configure-account-structures

NEW QUESTION # 127
A company is implementing Microsoft Dynamics 355 -Finance. The company plans to Implement the fixed asset module. You have the full awing requirements:
* Post transactions to the tax depreciation hook at the same interval as the primary book.
* Tax transactions must be journalized without being recorded in the general ledger.
You need to configure the 'wet! asset books.
Which conjuration option should you use? To , drag the appropriate urn figurations to the correct requirement. Each configuration may be used once, more than once, more not at all You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 128
You need to configure recognition.
Which revenue type is associated with the line of business? To answer, drag the appropriate revenue types to the correct lines of business. Each revenue type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 129
You need to configure the system to for existing purchasing contracts.
Which commitment types should you use? To answer, drag the appropriate commitment types to the correct requirements. Each commitment type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/procurement/tasks/create-purchase-agreement

NEW QUESTION # 130
A retail company has outlets in multiple locations. Taxes vary depending on the location.
You need to configure the various components of the tax framework.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

1 - Set up main accounts and ledger posting groups for sales tax.
2 - Set up sales tax authorities and sales tax settlement periods.
3 - Set up sales tax codes.
4 - Set up sales tax groups and item sales tax groups.
5 - Set up sales tax parameters on the application parameter pages.

NEW QUESTION # 131
You need to setup a process of tracking, recording, and analyzing costs associated with the products or activities of a nonmanufacturing organization.
You need to configure the prerequisite setup for the standard costing version for the current period.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation:

References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/cost-management/prerequisites-s

NEW QUESTION # 132
A company implemented Dynamics 365 Finance less than The following business rules must be implemented to
* Operations must be allowed to exceed budge
* Marketing must receive warnings when the)
* Sales must not exceed its budget.
* All departments must have a calculation in in place to determine what they can spend.
* Budget funds do not need to be recorded in the general ledger.
You need to configure budget controls.
Which configuration option should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one points.

Answer:

Explanation:

Explanation:

NEW QUESTION # 133
You must configure journal controls in Dynamics 365 for Finance and Operations.

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic

Answer:

Explanation:

NEW QUESTION # 134
You need to configure the system to meet invoicing requirement.
Which features should you use? To answer, drag the appropriate features to the correct requirements. Each feature may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/accounts-payable/vendor-invoices-overview

NEW QUESTION # 135
A company provides employee life insurance to all full-time employees. Employee life insurance policies are paid twice a year to the insurance company.
Transactions for current employees must be recognized in the general ledger twice a month with an employee's pay. Transactions for new employees must be recognized in the general ledger based upon the employee's first pay date.
You need to configure accrual schemes for the new fiscal year.
Which two configurations should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. For new employees, use a Credit accrual scheme. In the ledger accrual, set the offset to the first day of the fiscal year.
• B. For new employees, use a Debit accrual scheme. In the ledger accrual, set the offset to the employee's first pay date.
• C. For current employees, use a Credit accrual scheme. In the ledger accrual, set the offset to the employee's first pay date.
• D. For current employees, use a Debit accrual scheme. In the ledger accrual, set the offset to the first day of the fiscal year.

Answer: C,D

NEW QUESTION # 136
You are a controller in an organization. You are identifying cost drivers to see how changes in business activities affect the bottom line of your organization. You need to assess cost object performance to analyze actual versus budgeted cost and how resources are consumed.
You need to demonstrate your understanding of cost accounting terminology.
Which component maps to the cost accounting terminology?
To answer, drag the appropriate component to the correct cost accounting terminology. Each source may be used once. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

1 - fixed/variable/semi variable
2 - machine hours/kilowatt hours/squar footage
3 - products/projects/departments/cost center
4 - primary/secondary
Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/cost-accounting/terms-cost-accounting

NEW QUESTION # 137
A company is using vendors to produce components for its products.
Journal types are not configured to support vendor invoices-
You need to identify and configure journals to use for vendor invoices.
Which journal types should you use? To answer, select the appropriate options in the answer area, NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION # 138
......

Microsoft Dynamics 365 Finance Functional Consultant Certification Exam (MB-310) is designed for individuals who aim to enhance their skills and knowledge in finance and accounting. Microsoft Dynamics 365 Finance Functional Consultant certification exam is intended for those who want to work with Microsoft Dynamics 365 Finance and Operations applications. MB-310 exam is ideal for financial professionals, consultants, and developers who want to validate their expertise in finance-related tasks.

 

Pass Your Microsoft Exam with MB-310 Exam Dumps: https://www.braindumpsit.com/MB-310_real-exam.html

Verified MB-310 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1C_4foeORqhdZVBjMyOK77KFelSaGOmHP