H35-561 Free Exam Questions & Answers PDF Updated on Nov-2021

Latest H35-561 Exam Dumps Recently Updated 62 Questions

NEW QUESTION 21
If the PCI of a cell is 32, which of the following is the value of the SSS of this cell?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

 

NEW QUESTION 22
Which of the following ways can the eNodeB perform CS Fallback to UTRAN? (Multiple Choice)

• A. CA Fallback based on PS switching
• B. Fast (flash) CS Fallback
• C. CS Fallback based on PS redirection
• D. CS Fallback based on CCO/NACC

Answer: A,B,D

 

NEW QUESTION 23
Which of the following indicators can monitor whether wireless coverage is limited? (Multiple Choice)

• A. User number indicator
• B. CCE indicator
• C. PRB indicator
• D. MCS indicator

Answer: B,C

 

NEW QUESTION 24
Regarding the over-zone, overlapping coverage control, which of the following statements is wrong?

• A. Station spacing control: strictly avoid overlapping coverage sites within 100m
• B. The angle of the sector in the station should be kept as close as possible to 60 degrees, direct sparring between stations can enhance coverage
• C. Station height control: strictly control the station height to avoid over-zone interference
• D. Topological structure planning: the site distribution is as uniform as possible

Answer: D

 

NEW QUESTION 25
Regarding the demodulation reference signal, which of the following statements are correct? (multiple choice)

• A. Related to PUCCH
• B. Nothing to do with PUCCH
• C. Related to PUSCH
• D. Nothing to do with PUSCH

Answer: A,C

 

NEW QUESTION 26
The PCI plan is only for the same-frequency neighboring area. If it is an inter- frequency neighboring area, you can use the same PCI directly without considering the PCI planning.

• A. True
• B. False

Answer: A

 

NEW QUESTION 27
In LTE system, what is the length of the wireless subframe?

• A. 0.5ms
• B. 10ms
• C. 1ms
• D. 7ms

Answer: C

 

NEW QUESTION 28
PDCCH symbol adaptation means that the eNodeB adjusts the number of symbols occupied by the PDCCH according to the number of CCE resources actually needed by the system.

• A. True
• B. False

Answer: A

 

NEW QUESTION 29
The uplink signal of the UE of Type 1 for CoMP is simultaneously received by two cells (the serving cell and the coordinated cell), and the combined demodulation with respect to the number of receiving antenna increases. At this point, UL CoMP can achieve significant signal combining gain.

• A. True
• B. False

Answer: A

 

NEW QUESTION 30
Which of the following factors will affect the shadow fading margin? (Multiple choice)

• A. Edge coverage probability
• B. Type and length of the feeder
• C. The communication environment, such as rural and urban areas, will be different.
• D. Area coverage probability

Answer: A,C,D

 

NEW QUESTION 31
Which LTE TDD special subframe description is wrong?

• A. The length of the special subframe is also 1ms c
• B. Guard interval (GP) is required for uplink subframe to downlink subframe and downlink subframe to uplink subframe
• C. Special subframes are used for uplink and downlink synchronization and uplink and downlink isolation
• D. Special subframes include DwPTS, GP and UpPTS

Answer: B

 

NEW QUESTION 32
In the case of NB-IoT and LTE sharing master control, which configuration of the following parameters will only affect NB-IoT and have no impact on LTE?

• A. TAC configuration
• B. MME capability configuration
• C. Baseband board capability configuration
• D. Cell reference signal power configuration

Answer: D

 

NEW QUESTION 33
In which message is the UE voice capability "SRVCC to GERAN/UTRAN capability" (indicating that the UE supports the SRVCC capability) is reported to the MME?

• A. Attach accept
• B. RRC Connection Request
• C. RRC UE Cap info
• D. Attach request

Answer: D

 

NEW QUESTION 34
Which of the following options are modulation modes that the LTE system can support? (Multiple Choice)

• A. QPSK
• B. 64QAM
• C. GMSK
• D. 16QAM

Answer: A,B,D

 

NEW QUESTION 35
What are the factors that affect the average throughput rate of the community? (Multiple Choice)

• A. Data channel available bandwidth: The overhead of the common channel further determines the resources that the user can actually use.
• B. System bandwidth: The different bandwidth of the system determines the total R positivity of the system.
• C. Neighbor load: DLL load directly affects the flat throughput rate of the community
• D. The load of the cell: directly affects the number of RBs that can be used in the cell.

Answer: A,B,C,D

 

NEW QUESTION 36
Which of the following are the information elements contained in the RRC Connection Reconfiguration message? (Multiple choice)

• A. Wireless resource configuration
• B. NAS security parameters
• C. Measurement configuration
• D. Mobile control information

Answer: A,B,C,D

 

NEW QUESTION 37
Which of the following are NAS EMM? (Multiple choice)

• A. EPS bearer setup
• B. Tracking area update
• C. Attach
• D. Authentication

Answer: B,C,D

 

NEW QUESTION 38
Which of the scenarios in Huawei Probe & Assistant that will not be judged to be dropped?

• A. The RLC layer receives an abnormal RRC release command when it has a number of transmissions.
• B. RRC connection reestablishment failed
• C. Rebuild back to the source cell after the handover fails
• D. The terminal receives an abnormal DRB release command.

Answer: C

 

NEW QUESTION 39
The CA UE supports asymmetric carrier aggregation, that is, the number of component carriers of the downlink and uplink aggregation may be different, but the number of uplink component carriers cannot be greater than the downlink.

• A. True
• B. False

Answer: A

 

NEW QUESTION 40
Which channel does not use link adaptation technology?

• A. MCH
• B. BCH
• C. DL-SCH
• D. PCH

Answer: B

 

NEW QUESTION 41
How many TA does a TA list contain?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

 

NEW QUESTION 42
The PDCCH, PCFICH, and PHIC are mapped onto the control region in the subframe.

• A. True
• B. False

Answer: A

 

NEW QUESTION 43
What of the following does not belong to the cause of RRC connection failure?

• A. Authentication failure
• B. eNodeB rejects user access
• C. Weak coverage causes the UE to not respond
• D. eNodeB resource allocation failed

Answer: A

 

NEW QUESTION 44
Which of the following are types of switching based on the trigger? (Multiple choice)

• A. Business-based switching
• B. Switching based on UE moving speed
• C. Load-based switching
• D. Coverage based switching

Answer: A,B,C,D

 

NEW QUESTION 45
......

Huawei H35-561 Real 2021 Braindumps Mock Exam Dumps: https://www.braindumpsit.com/H35-561_real-exam.html