Latest HPE6-A79 Pass Guaranteed Exam Dumps with Accurate & Updated Questions
HPE6-A79 Exam Brain Dumps - Study Notes and Theory
HP HPE6-A79 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 11
Refer to the exhibit.
A network administrator has recently enabled WMM on the VAP's SSID profile and enabled UCC Skype4B ALG at the Mobility Master level. During testing, some voice and video conference calls were made, and it was concluded that the call quality has dramatically improved. However, end to end information isn't displayed in the call's details. Also, Skype4B app-sharing's performance is poor at times.
What must the administrator do next in order to enable end to end call visibility and QoS correction to app-sharing service?
- A. Increase the app-sharing DSCP value in the Skype4B ALG profile.
- B. Deploy the SDN API Software in the Skype4B Solution and point to the MM.
- C. Enable UCC monitoring on the "default-controller' mgmt.-server profile.
- D. Enable the App-sharing ALG profile at both MM and MD hierarchy levels.
Answer: D
NEW QUESTION 12
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator integrates a current Mobility Master (MM) - Mobility Controller (MC) deployment with a RADIUS server to authenticate a wireless user, the network administrator realizes that the client machine is not failing into the it_department role, as shown the exhibits.
Which configuration is required to map the users into the proper role, based on standard attributes returned by the RADIUS server in the Access Accept message?
- A. aaa server-group Corp-employee
set role condition Filter-Id equals it-role set-value it_department - B. aaa server-group Corp-Network
set role condition Filter-Id equals it-role set-value it_department - C. aaa server-group Corp-employee
set role condition Filter-Id value-of - D. aaa server-group Corp-Network
set role condition Filter-Id equals it_department set-value it-role - E. aaa server-group ClearPass
set role condition Filter-Id equals it_department set-value it-role
Answer: A
NEW QUESTION 13
Users run Skype for Business on wireless clients with no WMM support over an Aruba Mobility Master (MM) - Mobility Controller (MC) based network. When traffic arrives at the wired network, it does not include either L2 or L3 markings.
Which configuration steps should the network administrator take to classify and mark voice and video traffic with UCC heuristics mode?
- A. Confirm OpenFlow is enabled in the user role and VAP profile. Then enable WMM in a SSID profile, and explicitly permit voice and video UDP ports in a firewall policy.
- B. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and firewall roles. Enable Skype4Business ALG in UCC profiles.
- C. Enable WMM in a VAP profile, and explicitly permit voice and video UDP ports in a firewall policy.
- D. Confirm MM is the Openflow controller of MCs and Openflow is enabled in VAP and firewall roles. Enable Skype4Business ALG in UCC profiles.
Answer: C
NEW QUESTION 14
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server.
What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)
- A. Move "New" devices into a group and folder in Airwave.
- B. Set the AMP's IP address and Org string as DHCP option 43.
- C. Map the AMP's IP address with a mgmt-config profile in the MM.
- D. Manually add each MM. MC and Access Point in the AMP server.
- E. Manually add the Active MM and wait for automatic Discovery.
Answer: C,E
NEW QUESTION 15
An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20. They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the lowest convergence time and require no human interaction in case of failure.
The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.
What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)
- A. Configure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.
- B. Configure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.
- C. Allocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second MM and another IP address for its gateway.
- D. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another for the VIP.
- E. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another IP address for its gateway.
Answer: B,E
NEW QUESTION 16
Refer to the exhibit.
A network administrator has created AAA profile for the corporate VAP. In addition to the regular Radius based authentication, the administrator needs to be able to disconnect the users from either of the two servers that are part of the "Radius" server group.
What must the administrator do next in order to achieve this goal?
- A. Use the "Radius' server group as both the Accounting Server Group and the RFC 3576 server in the AAA profile.
- B. Use the "Radius" server group as the RADIUS Accounting Server Group in the AAA profile.
- C. Create two new RFC 3576 servers and assign them as the RFC 3576 servers in the AAA profile.
- D. Use the "Radius' server group as the RFC 3576 server in the AAA profile.
Answer: A
NEW QUESTION 17
A joint venture between two companies results in a fully functional WLAN Aruba solution. The network administrator uses the following script to integrate the WLAN solution with two radius servers, radius1 and radius2.
While all users authenticate with [email protected] type of credentials, radius1 has user accounts with the domain name portion.
Which additional configuration is required to authenticate corp1.com users with radius1 and corp2 users with radius2?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION 18
Refer to the exhibit.
A network administrator is evaluating a deployment to validate that a user is assigned the proper role and reviews the output in the exhibit. How is the role assigned to user?
- A. The MC assigned the role based on Aruba VSAs.
- B. The MC assigned the machine authentication default user role.
- C. The MC assigned the role based on server derivation rules.
- D. The MC assigned the default role based on the authentication method.
Answer: D
NEW QUESTION 19
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based network security. Recently the Air Monitors detected a Rogue AP in the network and the administrator wants to enable "Tarpit" based wireless containment.
What profile must the administrator enable "tarpit" wireless containment on?
- A. IDS profile
- B. IDS DOS profile
- C. IDS General profile
- D. IDS Unauthorized device profile
Answer: D
NEW QUESTION 20
A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?
- A. Map the four physical ports to port channel 0.
- B. Disable spanning tree and allocate unique VLANs to each port.
- C. Manually set 10Gbps speeds on all ports.
- D. Make all ports trunk interfaces and permit data VLANs.
- E. Configure the same MSTP region that the switches have.
Answer: C
NEW QUESTION 21
A company with 535 users deploys an Aruba solution with more than 1000 Aruba APs, two 7220 Mobility Controllers, and a single Mobility Master (MM) virtual appliance at the campus server farm. The MCs run a HA Fast failover group in dual mode and operate at 50% AP capacity.
If there is an MM or MC failure, the network administrator must ensure that the network is fully manageable and the MC load does not exceed 80%.
What can the network administrator do to meet these requirements?
- A. Add an MC and an MM in the server farm.
- B. Place the APs in two different AP-Groups.
- C. Create a cluster with AP load balancing.
- D. Place the APs in the same hierarchy level.
- E. Add an MM and enable DC redundancy.
- F. Enable oversubscription in the HA group.
Answer: E
NEW QUESTION 22
Refer to the exhibits.
A user reports slow response time to a network administrator and suggests that there might be a problem with the WLAN. The user's phone supports 802.11ac in the 5 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
- A. Client health is poor, but SNR is fair. TX power must be increased in both the client and the AP.
- B. High Successful frame count and high Max Speed is an indication of a healthy client. Connection will improve at anytime.
- C. The low SNR forces the client to back off to low MCs. therefore speed is low and retransmits are high.
- D. Since SNR is good, then the high retransmit rate must be due a hidden node scenario or high interference.
Answer: B
NEW QUESTION 23
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 3
A network administrator wants to allow contractors to access the corporate WLAN named EmployeesNet with the contractor role in VLAN 40. When users connect, they do not seem to get an IP address. After some verification checks, the network administrator confirms the DHCP server (10.254.1.21) is reachable from the Mobility Controller (MC) and obtains the outputs shown in the exhibits.
What should the network administrator do next to troubleshoot this problem?
- A. Configure the DHCP helper address.
- B. Confirm there is an IP pool for VLAN 40.
- C. Permit UDP67 to the contractor role.
- D. Remove the IP address in VLAN 40.
Answer: C
NEW QUESTION 24
Refer to the exhibit.
After deploying several cluster pairs, the network administrator notices that all APs assigned to Cluster1 communicate with MC1 instead of being distributed between members of the cluster. Also, no IP addresses are shown under the Standby IP column.
What should the network administrator do to fix this situation?
- A. Rename the cluster profile as "CLUSTER1".
- B. Apply the same cluster profile to both members.
- C. Enable Cluster AP load balancing.
- D. Place MCs at the same hierarchical group level.
Answer: A
NEW QUESTION 25
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator adds a new Mobility Controller (MC) to the production Mobility Master (MM) and deploys APs that start broadcasting the employee SSID in the West wing of the building. Suddenly, the employees report client disconnects. When accessing the MM the network administrator notices that the MC is unreachable, then proceeds to access the MC's console and obtains the outputs shown in the exhibits.
What should the network administrator do next to solve the current problem?
- A. Decommission the MC from the MM, and add it again.
- B. Open a TAC case and send the output of tar crash.
- C. Kill two zombie processes then reboot the MC.
- D. Verify the license pools in the MM.
Answer: D
NEW QUESTION 26
Refer to the exhibit.
A network administrator wants to configure an 802.1x supplicant for a wireless network that includes the following:
* AES encryption
* EAP-MSCHAP v2-based user and machine authentication
* Validation of server certificate in Microsoft Windows 10
The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additional Settings.
What must the network administrator do next to accomplish the task?
- A. Change the security type to Microsoft: Smart Card or other certificate.
- B. Enable server certificate validation under Settings.
- C. Change default RC4 encryption for AES.
- D. Enable user authentication under Settings
Answer: A
NEW QUESTION 27
A network administrator has updated the ArubaOS code of a standalone Mobility Controller (MC) that is used for User-Based Tunneling (UBT) to a newer early release. Ever since the MC seems to reject PAPI sessions from the switch with the 10.1.10.10 IP address. Also the controller's prompt is now followed by a star mark: "(MC_VA) [mynode] *#" When opening a support ticket, an Aruba TAC engineer asks the administrator to gather the crash logs and if possible replicate UBT connection attempts from the switch while running packet captures of PAPI traffic on the controller and obtain the PCAP files. The administrator has a PC with Wireshark and TFTP server using the 10.0.20.20 IP address.
What commands must the administrator issue to accomplish these requests? (Choose two.)
- A. Option E
- B. Option D
- C. Option A
- D. Option C
- E. Option B
Answer: A,E
NEW QUESTION 28
......
Pass HP HPE6-A79 Test Practice Test Questions Exam Dumps: https://www.braindumpsit.com/HPE6-A79_real-exam.html