[Nov 20, 2021] 1Z0-996-20 Exam Dumps PDF Updated Dump from  BraindumpsIT Guaranteed Success

Pass Your Oracle Exam with 1Z0-996-20 Exam Dumps

NEW QUESTION 24
Using a base-supplied algorithm type, what is payment distribution priority typically determined by?

• A. Payment Type + Debt Age
• B. Debt Age
• C. Service Agreement Type's Priority and Debt Age
• D. Customer Class and Service Agreement Type
• E. Customer Class and Debt Age

Answer: E

 

NEW QUESTION 25
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?

• A. Critical Validation
• B. post-VEE
• C. Prepare for VEE
• D. VEE

Answer: A

 

NEW QUESTION 26
On which three entities can proration be disabled? (Choose three.)

• A. Calculation Rule
• B. Calculation Rule Business Object
• C. Rate Schedule
• D. Bill Factor
• E. Rate Version Calculation Group

Answer: B,C,E

 

NEW QUESTION 27
Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs to add new critical validations, where would you configure them?

• A. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)
• B. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)
• C. as options on the IMD Seeder BO (D1-IMDSeeder)
• D. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)
• E. in the schema of the IMD Seeder BO (D1-IMDSeeder)

Answer: D

 

NEW QUESTION 28
Your client has installed scalar devices to measure the solar energy generated (Export) and the energy received (Import) from the National Grid. This data is stored in separate measuring components (registers).
The validation rules are generally the same for both measuring components, but there is one exception. The Negative Consumption check applies only to energy received (import).
Which two are possible configurations resulting in the Negative Consumption rule being checked for energy received (import) only? (Choose two.)

• A. Use Eligibility Criteria.
• B. Create two different VEE groups.
• C. Remove the Negative Consumption check from the VEE group.
• D. Modify the base VEE rule.
• E. Use the Skip Flag in the VEE rule.

Answer: A,B

 

NEW QUESTION 29
What can cause a bill segment to have multiple bill calculation headers?

• A. proration at Bill Factor level
• B. multiple service agreements being covered by a bill segment
• C. multiple Rate Version Calculation Group
• D. multiple Scheduled Read Dates covered by the bill period
• E. proration at Calculation Rules level

Answer: A

 

NEW QUESTION 30
Which three statements are true in relation to a Payment Arrangement Request? (Choose three.)

• A. creates the Payment Arrangement Service Agreement
• B. examines the Account's eligibility for Payment Arrangement
• C. ensures creation of either Pay Plan or Payment Arrangement
• D. calculates delinquent amount for Service Agreements eligible for Payment Arrangement
• E. determines if the Payment Arrangement Request requires approval

Answer: A,B,E

 

NEW QUESTION 31
How should you configure the derived values that are relevant for a device?

• A. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.
• B. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.
• C. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.
• D. Configure the derived values on the Device Type for the derived values to be defined on the device.

Answer: A

 

NEW QUESTION 32
Which three statements are true about initial measurements, final measurements, and usage? (Choose three.)

• A. A service point can have more than one initial measurement for the same period, but only one final measurement.
• B. Final measurements can be directly edited or updated by users or by automated processes as required.
• C. Usage is loaded in the application to generate final measurements.
• D. Usage is a synonym for bill determinants.
• E. The initial measurement data can be optionally stored in Raw format.

Answer: A,B,C

 

NEW QUESTION 33
How many bill segment-related financial transactions do Payment Arrangements have?

• A. one
• B. none
• C. depends on the number of bills that will contain the customer's payment arrangement details
• D. unlimited
• E. depends on the number of payments that are part of the payment arrangement

Answer: A

Explanation:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)

 

NEW QUESTION 34
For a customer to receive a Subscription communication, what must they have?

• A. an active address contact preference
• B. an active account contact preference
• C. an active address type preference
• D. an active person contact preference

Answer: B

 

NEW QUESTION 35
How many devices can be installed at a service point at an instance in time?

• A. one for each service type
• B. one for each measuring component
• C. exactly one device
• D. up to three devices

Answer: C

 

NEW QUESTION 36
Which option correctly describes the high-level process from loading measurements through calculating usage?

• A. 1. Load Initial Measurements
  2. Validate, evaluate, and estimate Initial Measurements
  3. Update Initial Measurements
  4. Calculate Usage
• B. 1. Load Initial Measurements
  2. Validate, edit, and estimate Initial Measurements
  3. Create Final Measurements
  4. Calculate Usage
• C. 1. Load Initial Measurements
  2. Verify, evaluate, and enter Initial Measurements
  3. Create Final Measurements
  4. Calculate Usage
• D. 1. Load Initial Measurements
  2. Validate, edit, and estimate Initial Measurements
  3. Create Final Measurements
  4. Update Initial Measurements

Answer: C

 

NEW QUESTION 37
Which statement supports usage transaction calculation?

• A. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
• B. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
• C. Bill determinants are derived from the final measurements for only interval measuring components or devices installed at the usage subscription's service points during the calculation period.
• D. Bill determinants are derived from the initial measurement data of the measuring components devices installed at the usage subscription's service points during calculation period.

Answer: A

 

NEW QUESTION 38
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)

• A. Information
• B. Complete
• C. Low
• D. Issue
• E. Terminate

Answer: A,D,E

 

NEW QUESTION 39
Which describes derived values and their relationship with Final Measurements?

• A. Final Measurements can have one derived value, which represents an alternative for the same Final Measurement Date/Time.
• B. Final Measurements can have one derived value, which represents the Initial Measurement for the same Final Measurement Date/Time.
• C. Derived values can have multiple Final Measurements, which represent other values for the same Initial Measurement Date/Time.
• D. Final Measurements can have multiple derived values, which represent other values for the same Final Measurement Date/Time.

Answer: B

 

NEW QUESTION 40
What Service Order activity types does the application include?

• A. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
• B. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
• C. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
• D. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service

Answer: D

 

NEW QUESTION 41
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?

• A. in the Usage Rule Type
• B. in the Service Point Type
• C. in the Measuring Component Type
• D. in the Usage Subscription Type
• E. in the Device Type

Answer: D

 

NEW QUESTION 42
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributes of a measuring component?

• A. Manufacturer and Model
• B. Serial Number and Badge Number
• C. Channel ID and Badge Number
• D. Channel Multiplier and Channel ID
• E. Model and Serial Number

Answer: B

 

NEW QUESTION 43
Which business object performs critical validations whenever initial measurements are loaded?

• A. D1-IMDSeeder
• B. D1-IMDRetry
• C. D1-GenericIMDMain
• D. D1-IMDPeriod
• E. D1-IMDPreVEE

Answer: A

 

NEW QUESTION 44
Which usage rule would be used to retrieve scalar measurements and convert the total from one unit of measure to another?

• A. Get Scalar Details and Math
• B. A custom set of usage rules must be written.
• C. Get Scalar Details and Axis Conversion
• D. Get Scalar Details and Apply Formula

Answer: C

 

NEW QUESTION 45
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)

• A. Start Service Agreement
• B. Create Service Point
• C. Check for Measurement
• D. Customer Device Compatibility Check
• E. Create Usage Subscription

Answer: C,D

 

NEW QUESTION 46
Which three are important Account concepts that must always be followed? (Choose three.)

• A. Bills are produced for an account and are sent to the account persons.
• B. An Account references one or more persons.
• C. Accounts expire when there are no active contracts.
• D. An Account can only reference one and only one person at one time.
• E. Every Account has a unique, system-assigned Account ID.

Answer: A,D,E

 

NEW QUESTION 47
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?

• A. Device Type and Measuring Component Type
• B. Measuring Component Type
• C. Usage Type
• D. Device Type
• E. Device Configuration Type

Answer: E

 

NEW QUESTION 48
......

New Real 1Z0-996-20 Exam Dumps Questions: https://www.braindumpsit.com/1Z0-996-20_real-exam.html