Oct-2021 Cisco 300-710 Certification Real 2021 Mock Exam
300-710 Exam Questions and Valid PMP Dumps PDF
What Designation to Achieve Next?
After these certificates have been attained, candidates can then pursue more advanced expert-level certifications in the future such as the popular CCIE Security offered by the same vendor.
NEW QUESTION 62
Which Cisco Advanced Malware Protection for Endpoints policy is used only for monitoring endpoint actively?
- A. triage
- B. Windows domain controller
- C. audit
- D. protection
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/amp-endpoints/214933-amp-for-endpoints-deployment-methodology.html
NEW QUESTION 63
An engineer must build redundancy into the network and traffic must continuously flow if a redundant switch in front of the firewall goes down. What must be configured to accomplish this task?
- A. redundant interfaces on the firewall noncluster mode and switches
- B. vPC on the switches to the span EtherChannel on the firewall cluster
- C. vPC on the switches to the interface mode on the firewall duster
- D. redundant interfaces on the firewall cluster mode and switches
Answer: B
NEW QUESTION 64
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs Each DMZ has a unique private IP subnet range. How is this requirement satisfied?
- A. Deploy the firewall in routed mode with access control policies.
- B. Deploy the firewall in transparent mode with NAT configured.
- C. Deploy the firewall in routed mode with NAT configured.
- D. Deploy the firewall in transparent mode with access control policies.
Answer: A
NEW QUESTION 65
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by bypassing protocol inspection by leveraging pre-filter rules
- B. by leveraging the ARP to direct traffic through the firewall
- C. by using a BVI and create a BVI IP address in the same subnet as the user segment
- D. by assigning an inline set interface
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION 66
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high- availability?
- A. configure high-availability resume
- B. system support network-options
- C. configure high-availability disable
- D. configure high-availability suspend
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 67
An engineer has been tasked with using Cisco FMC to determine if files being sent through the network are malware. Which two configuration takes must be performed to achieve this file lookup? (Choose two.)
- A. The Cisco FMC needs to include a SSL decryption policy.
- B. The Cisco FMC needs to connect with the FireAMP Cloud.
- C. The Cisco FMC needs to include a file inspection policy for malware lookup.
- D. The Cisco FMC needs to connect to the Cisco AMP for Endpoints service.
- E. The Cisco FMC needs to connect to the Cisco ThreatGrid service directly for sandboxing.
Answer: B,C
NEW QUESTION 68
What is the disadvantage of setting up a site-to-site VPN in a clustered-units environment?
- A. VPN connections must be re-established when a new master unit is elected.
- B. Smart License is required to maintain VPN connections simultaneously across all cluster units.
- C. Only established VPN connections are maintained when a new master unit is elected.
- D. VPN connections can be re-established only if the failed master unit recovers.
Answer: A
NEW QUESTION 69
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator manually updates the policies.
- B. Cisco Firepower gives recommendations to update the policies.
- C. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- D. Cisco Firepower automatically updates the policies.
Answer: B
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION 70
When do you need the file-size command option during troubleshooting with packet capture?
- A. when capture packets exceed 10 GB
- B. when capture packets are less than 16 MB
- C. when capture packets exceed 32 MB
- D. when capture packets are restricted from the secondary memory
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/troubleshooting_the_system.html
NEW QUESTION 71
A network administrator needs to create a policy on Cisco Firepower to fast-path traffic to avoid Layer 7 inspection. The rate at which traffic is inspected must be optimized. What must be done to achieve this goal?
- A. Configure a prefilter policy.
- B. Disable TCP inspection.
- C. Enable lhe FXOS for multi-instance.
- D. Configure modular policy framework.
Answer: A
NEW QUESTION 72
What are two application layer preprocessors? (Choose two.)
- A. DNP3
- B. SSL
- C. CIFS
- D. ICMP
- E. IMAP
Answer: B,E
Explanation:
Section: Deployment
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Application_Layer_Preprocessors.html
NEW QUESTION 73
An engineer is attempting to create a new dashboard within the Cisco FMC to have a single view with widgets from many of the other dashboards. The goal is to have a mixture of threat and security related widgets along with Cisco Firepower device health information Which two widgets must be configured to provide this information? (Choose two.)
- A. Current Sessions
- B. Correlation Information
- C. Intrusion Events
- D. Appliance Status
- E. Network Compliance
Answer: B,C
NEW QUESTION 74
Which Cisco Firepower feature is used to reduce the number of events received in a period of time?
- A. correlation
- B. rate-limiting
- C. suspending
- D. thresholding
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-Global-Threshold.html
NEW QUESTION 75
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
- A. /etc/sf/DCEALERT.MIB
- B. /sf/etc/DCEALERT.MIB
- C. /etc/sf/DCMIB.ALERT
- D. system/etc/DCEALERT.MIB
Answer: A
NEW QUESTION 76
Which object type supports object overrides?
- A. security group tag
- B. network object
- C. time range
- D. DNS server group
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Reusable_Objects.html#concept_8BFE8B9A83D742D9B647A74F7AD50053
NEW QUESTION 77
A security engineer is configuring an Access Control Policy for multiple branch locations These locations share a common rule set and utilize a network object called INSIDE_NET which contains the locally significant internal network subnets at each location What technique will retain the policy consistency at each location but allow only the locally significant network subnet within the applicable rules?
- A. creating an ACP with an INSIDE_NET network object and object overrides
- B. utilizing a dynamic ACP that updates from Cisco Talos
- C. creating a unique ACP per device
- D. utilizing policy inheritance
Answer: A
NEW QUESTION 78
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
- B. File policies use an associated variable set to perform intrusion prevention.
- C. Traffic inspection is interrupted temporarily when configuration changes are deployed.
- D. They block traffic based on Security Intelligence data.
- E. The system performs intrusion inspection followed by file inspection.
Answer: C,D
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Access_Control_Using_Intrusion_and_File_Policies.html
NEW QUESTION 79
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
- A. Child domains cannot view dashboards that originate from an ancestor domain.
- B. Only the administrator of the top ancestor domain can view dashboards.
- C. Child domains have access to only a limited set of widgets from ancestor domains.
- D. Child domains can view but not edit dashboards that originate from an ancestor domain.
Answer: A
NEW QUESTION 80
......
Cisco 300-710 Exam Certification Details:
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Exam Code | 300-710 SNCF |
| Recommended Training | Securing Networks with Cisco Firepower Next Generation Firewall (SSNGFW) Securing Networks with Cisco Firepower Next-Generation IPS (SSFIPS) |
| Exam Price | $300 USD |
| Exam Registration | PEARSON VUE |
| Sample Questions | Cisco 300-710 Sample Questions |
| Number of Questions | 55-65 |
| Exam Name | Securing Networks with Cisco Firepower |
| Duration | 90 minutes |
300-710 Question Bank: Free PDF Download Recently Updated Questions: https://www.braindumpsit.com/300-710_real-exam.html
300-710 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1r6U_bruVIqK6G3EUE_OBChF_090oFCaC