Practice on 2024 LATEST 300-425 Exam Updated 200 Questions

Download Latest 300-425 Dumps with Authentic Real Exam QA's

Exam Target Audience

Individuals qualifying for 300-425 exam are specialists who are into the designing of wireless network solutions which the enterprise requires. As a rule, these are network engineers or network analysts. They qualify for this validation only after passing the core exam that stands for Cisco core technologies targeting the network of an enterprise.

The Cisco 300-425 exam consists of 60-70 multiple-choice questions that must be completed within 90 minutes. It is conducted by Pearson VUE, a leading provider of computer-based testing and assessment services. To pass the exam, candidates must score at least 750 out of 1000 points. 300-425 exam fee is $300, and it can be taken at any Pearson VUE testing center worldwide.

 

NEW QUESTION # 67
An engineer changed the TPC Power Threshold for wireless deployment from the default value to -65 dBm. The engineer conducts a new post-deployment Survey to validate the results What is the expected outcome?

• A. Decreased client signal strength
• B. Decreased channel overlap
• C. Increase cell size
• D. Increased received sensitivity

Answer: A

NEW QUESTION # 68
An engineer is working for an enterprise and deployed a Cisco 9800 Series Wireless Controller. The wireless infrastructure serves the employees and guest users across the company. The engineer must configure the controller to alleviate the sticky client issue in the deployment. Which action resolves the issue?

• A. Enable Optimize Roaming.
• B. Enable data RSSI to -90db.
• C. Enable CHDM.
• D. Enable 802.11k.

Answer: A

Explanation:
The sticky client issue occurs when a wireless client device clings to a suboptimal access point instead of roaming to a better one with a stronger signal. Enabling Optimize Roaming on the Cisco 9800 Series Wireless Controller can alleviate this issue. This feature prompts clients to roam by disassociating them when their signal strength drops below a threshold, encouraging them to seek a better connection.

NEW QUESTION # 69
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?

• A. voice design model
• B. roaming design model
• C. location design model
• D. high-density design model

Answer: A

Explanation:
Section: Wired and Wireless Infrastructure

NEW QUESTION # 70
Refer to the exhibit.

During a post Mesh deployment survey, an engineer notices that frame cessions occur when MAP-1 and MAP-3 talk to RAP-2. Which type of issue does the engineer need to address in the design?

• A. hidden node
• B. backhaul latency
• C. exposed node
• D. co-channel interference

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-3/design/guide/Mesh/Mesh_chapter_0100.html

NEW QUESTION # 71
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?

• A. overlapping -72 dBm coverage from two access points
• B. continuous -67 dBm coverage from one access point
• C. continuous -72 dBm coverage from one access point
• D. overlapping -67 dBm coverage from two access points

Answer: B

Explanation:
Explanation

So -67dBm covers both Data & Voice with a single AP

NEW QUESTION # 72
A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients. What should be enabled on the VoWLAN SSID?

• A. 802.11v BSS Transition Management
• B. CCKM with 802.1X
• C. 802.11k neighbor lists
• D. 802.11r Fast Transition

Answer: C

Explanation:
To support VoWLAN services and provide roaming recommendations to supported voice clients without impacting non-VoWLAN clients, the feature that should be enabled on the VoWLAN SSID is 802.11k neighbor lists. This feature allows APs to provide information about neighboring APs that are candidates for roaming, which helps clients make better decisions about when and where to roam. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice

NEW QUESTION # 73
A network engineer is designing a new wireless network. The network needs to have these characteristics:
* support high client concentration
* optimize client performance
* avoid interference
Which approach should be taken?

• A. Deploy APs near each other for 2 4 GHz coverage, and disable the 5 GHz radios for some APs
• B. Deploy APs near each other for 5 GHz coverage, and enable me 2.4 GHz radios for all APs.
• C. Deploy APs near each other for 2 4 GHz coverage and disable the 5 GHz radios for all APs
• D. Deploy APs near each other for 5 GHz coverage, and disable the 2 4 GHz radios for some APs

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-6/b_Cisco_Wireless_LAN_Controller_Configuration_Best_Practices.html

NEW QUESTION # 74
A wireless engineer is hired to design a network for a technology company. The company campus has four buildings and a warehouse with access points that provide full wireless coverage as well as a pair of WLCs located in the core of the network. Which type of wireless architecture is being used?

• A. distributed deployment
• B. unified deployment
• C. centralized deployment
• D. autonomous deployment

Answer: C

Explanation:
The wireless architecture described is a centralized deployment. This is characterized by access points distributed across multiple buildings and managed centrally by Wireless LAN Controllers (WLCs).
Centralized deployments are common in larger environments like a technology company campus because they allow for centralized management, scalability, and advanced features such as load balancing and fault tolerance.
References:
* CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice Tests

NEW QUESTION # 75
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?

• A. FT
• B. GTK-randomization
• C. PEAP
• D. PMF

Answer: A

Explanation:

NEW QUESTION # 76
Refer to the exhibit.

A network engineer has identified that during a recent controller failure, several APs failed over to the tertiary controller instead of the secondary controller. The configuration from one of the APs is provided. Which design consideration led to the issue?

• A. The tertiary controller is in the same subnet as the primary controller.
• B. The secondary controller was at capacity.
• C. The tertiary controller is an HA-SKU controller, so it took priority.
• D. The secondary controller is an SSO configuration.

Answer: B

Explanation:
The issue where APs failed over to the tertiary controller instead of the secondary controller during a controller failure is likely due to the secondary controller being at capacity. When a controller reaches its maximum capacity, it cannot accept any additional APs, causing them to failover to the next available controller in the high availability configuration.

NEW QUESTION # 77
Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC. What is the reason that it is failing?

• A. A rule is needed at the firewall to allow UDP port 16666 for communication towork.
• B. A rule is needed at the firewall to allow TCP port 97 for communication to work.
• C. A rule is needed at the firewall to allow UDP port 97 for communication to work.
• D. A rule is needed at the firewall to allow TCP port 16666 for communication to work.

Answer: A

Explanation:
Guest anchoring requires mobility tunnels to be established between the foreign and anchor WLCs. For these tunnels to function, the firewall must allow specific ports for communication. UDP port 16666 is the port used for mobility traffic in Cisco wireless networks, and if it is not allowed through the firewall, MPING and mobility tunnels will fail. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice

NEW QUESTION # 78
An engineer is setting up the WLC to support a high-density design for a lecture hall. The engineer must modify the existing high-density RF protocol to obtain a smaller cell size. Also, the clients must connect to the nearest AP using the highest possible data rates. Which setting allows this design?

• A. power threshold
• B. client distribution
• C. AP load balance
• D. RX-SOP threshold

Answer: D

Explanation:
Adjusting the RX-SOP (Receiver Start of Packet Detection Threshold) can help to control cell size by making APs less sensitive to low-level signals, thus requiring clients to be closer to the AP to connect, which can ensure they connect to the nearest AP with the highest data rates.

NEW QUESTION # 79
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?

• A. ping
• B. rping
• C. mping
• D. eping

Answer: B

Explanation:

NEW QUESTION # 80
Refer to the exhibit. An engineer must design a mobility group that has these requirements:
* The mobility group must consist of two WLCs.
* All WLCs must run software version 8.0 or later.
* The WLCs must connect via an IPv4 network.
* Two of the WLCs must be in an SSO high availability pair.
Which two configurations must be included in the design? (Choose two.)

• A. The WLAN SSID must be consistent across all the WLCs.
• B. All the WLCs must be of the same model or type.
• C. Each WLC must use the same mobility domain name.
• D. All the WLCs must run the same software version.
• E. Only WLCs in an SSO high availability pair must use the same virtual IP address.

Answer: A,C

NEW QUESTION # 81
An engineer must create data-link redundancy for the company's Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)

• A. All interface traffic passes as long as one port is up.
• B. Full bandwidth of all links is available.
• C. Ports are grouped into multiple LAGs.
• D. Interface connection to two separate nonstacked switches is available.
• E. The same port has multiple untagged dynamics interfaces.
• F. Packets are always sent out on the same port they are received on.

Answer: A,C,F

Explanation:
Explanation
https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669

NEW QUESTION # 82
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?

• A. A redundant power supply is unavailable on the switch.
• B. The AP is getting power from a power injector.
• C. The switch is PoE+ capable.
• D. The switch is 802.3af capable.

Answer: C

Explanation:

NEW QUESTION # 83
A network engineer is designing a new wireless network. The network needs to have these characteristics:

Which approach should be taken?

• A. Deploy APs near each other for 5 GHz coverage, and disable the 2A GHz radios for some Aps.
• B. Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for some APs.
• C. Deploy APs near each other for 5 GHz coverage, and enable the 2.4 GHz radios for all Aps.
• D. Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for all APs.

Answer: A

Explanation:
In environments with high client density, deploying APs for 5 GHz coverage is recommended due to the larger number of non-overlapping channels available, which can support higher data rates and client capacity.
Disabling the 2.4 GHz radios on some APs can reduce interference and improve overall network performance.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/86/b_Cisco_Wireless_LAN_Controller_Con

NEW QUESTION # 84
A customer called with a requirement that internal clients must be on different subnets depending on the building they are in All access points are operating in local mode and will not be modified, and this is a single controller solution Which design approach creates the desired result?

• A. Create AP groups for each desired location, map the correct VLANs to the internal SSlD and add the access prints for that location
• B. Create an SSID. place it to the desired VLAN under WLANs. and configure 802.ix in ISE to assign the correct VLAN based on the SSlD from which the client is authenticating.
• C. Create mobility anchors for the SSID. and on the controller under the internal SSID. create a foreign map to the desired VLAN based on location
• D. Create FiexConnect groups, place the access points in. and set the correct VLAN to SSlD mapping based on location.

Answer: A

NEW QUESTION # 85
A customer uses a Cisco Catalyst 9800 Series wireless controller to manage all of the APs for a campus network. Secure guest access is required for the guest network. A Cisco 5520 anchor controller is deployed within a DMZ. Which design approach ensures that the mobility tunnel is established successfully between the wireless controller and the anchor controller?

• A. Run an Inter-Release Controller Mobility compatible software version on the wireless controller.
• B. Enable control plane encryption on the wireless controller.
• C. Run an Inter-Release Controller Mobility compatible software version on the anchor controller.
• D. Disable data link encryption on the anchor controller.

Answer: B

Explanation:
Enabling control plane encryption on the wireless controller is crucial for establishing a secure mobility tunnel between the wireless controller and the anchor controller. Control plane encryption ensures that the signaling and management traffic traversing the mobility tunnel is encrypted, providing a secure channel for guest access authentication and authorization processes. This is particularly important when the anchor controller is deployed within a DMZ, as it is exposed to potential external threats. The Cisco Catalyst 9800 Series wireless controller supports control plane security features that can be leveraged to secure the mobility tunnel and ensure the integrity and confidentiality of the control traffic.

NEW QUESTION # 86
What is the purpose of the autonomous-system {autonomous-system-number} command?

• A. It sets the global BGP autonomous system number.
• B. It sets the global EIGRP autonomous system number.
• C. It sets the BGP autonomous system number in a VRF.
• D. It sets the EIGRP autonomous system number in a VRF.

Answer: D

Explanation:
To configure the autonomous-system number for an Enhanced Interior Gateway Routing Protocol (EIGRP) routing process to run within a VPN routing and forwarding (VRF) instance, use the autonomous-system command in address-family configuration mode. To remove the autonomous-system for an EIGRP routing process from within a VPN VRF instance, use the no form of this command.
Autonomous-system autonomous-system-number
no autonomous-system autonomous-system-number
Reference: http://www.cisco.com/c/en/us/td/docs/ios/iproute_eigrp/command/reference/ire_book/ ire_a1.html#wp1062796

NEW QUESTION # 87
An engineer is trying to configure the APs installed in a new auditorium to use 40 MHz channels with high data rates and lower TX power. The APs in the building hallway must use lower-density design settings configured for the rest of the building. Which two configurations achieve this design? (Choose two.)

• A. RRM
• B. RF protocol
• C. DCA
• D. TPC
• E. AP group

Answer: B,E

NEW QUESTION # 88
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?

• A. FT
• B. GTK-randomization
• C. PEAP
• D. PMF

Answer: A

Explanation:

NEW QUESTION # 89
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?

• A. 802.11i
• B. 802.11ac
• C. 802.11e
• D. 802.11r

Answer: D

Explanation:

NEW QUESTION # 90
A customer asks an engineer to explain the concept of mobility domains and mobility groups. Which statement does the engineer respond with?

• A. WLCs do not need to be in the same mobility domain to communicate with each other. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
• B. If WLCs are in the same mobility domain, they communicate with each other but, if an anchor WLC is present it must be in the same mobility domain for communication to be possible.
• C. If WLCs are in the same mobility domain, they communicate with each other. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
• D. A mobility group does not constrain the distribution of security context of a client and also does not constrain AP fail-over between controllers when the WLC are in the same mobility domain.

Answer: C

NEW QUESTION # 91
An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?

• A. best client available
• B. worst client available
• C. phone client
• D. normal client

Answer: B

Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-gu

NEW QUESTION # 92
......

Now you can read the solution to Prepare the Cisco 300-425 Exam

Types of sources originally, there are the research study guides along with magazines that are defined and also ideal for establishing knowledge from ground up afterwards there are video clip tutorials along with talks that can somehow reduce the discomfort of via research study and are rather a whole lot much less plain for some prospects yet these demand time as well as concentration from the student. Smart Prospects that want to produce a strong structure in all Test topics in addition to additionally associated contemporary modern technologies generally integrate video clip talks with research study styles to reap the benefits of both nevertheless, there is one essential preparation task device as usually forgotten by a great deal of leads the technique tests.

No person likes bankruptcy, typically in intricate setups where certification needs a large amount of research study, planning and likewise interest. An initiative is so demanding that it can even break students' nerves. Our download Exams are so efficient that you will definitely fail to remember the failings. Problems as well as remedies are so preferably developed that there is no chance of stopping working. However, there is little circumstance where the trainee has really give up working after obtaining our aid, however, even if they do, we supply a complete reimbursement of the settlement. Strategy Examinations are created to make students comfortable with the genuine exam condition. If we see the statistics most trainees stop working not as a result of that prep job yet as a result of Examanxiety the concern of the unknown. BraindumpsIT Professional Group recommends you to prepare some notes on these subjects together with it do not forget to exercise Cisco 300-425 Dump which had in truth been composed by our Experts Team, Both these will assist you a good deal to eliminate this Exam with amazing marks.

 

Authentic 300-425 Exam Dumps PDF - Sep-2024 Updated: https://www.braindumpsit.com/300-425_real-exam.html

300-425 Dumps Special Discount for limited time Try FOR FREE: https://drive.google.com/open?id=1BjWLSziI3YWseVxvf6FXwahnVCCpvtB3