Prepare for the Actual NSE 7 Network Security Architect NSE7_EFW-6.4 Exam Practice Materials Collection
NSE 7 Network Security Architect Certified Official Practice Test NSE7_EFW-6.4 - Jun-2022
Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Certification Path
The Fortinet Network Security Expert (NSE) program is an eight-level training and certification program designed to provide objective confirmation of your network security expertise and knowledge to interested technical professionals. A broad range of self-paced and instructor-led courses are included in the NSE curriculum, as well as realistic, experiential activities that demonstrate mastery of complex concepts of network security.
For the Network Security Analyst, candidates must complete only 2 exams from the available five options. These exams are listed below:
- Fortinet NSE 7 - Secure Access
- Fortinet NSE 7 - Cloud Security
- Fortinet NSE 7 - SD-WAN
Topics of Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
Following are the objectives and agenda for this certification exam. A detailed practice for these contents could be done via the NSE7 EFW-6.4 practice exams as they are made on the same contents and offer the same environment for students to experience as the real exam does:
System and session troubleshooting
- Traffic and session monitoring
- Implement the Fortinet Security Fabric
- High availability
Central management
- Central management and analysis using FortiManager and FortiAnalyzer
Content inspection
- Web filtering
- Antivirus
- Intrusion Prevention System (IPS)
- FortiGuard
Routing and Layer 2 switching
- Static routing
- Dynamic routing: OSPF, Border Gateway Protocol (BGP)
VPN
- IPsec
- Autodiscovery VPN (ADVPN)
NEW QUESTION 34
Which of the following conditions must be met for a static route to be active in the routing table? (Choose three.)
- A. The outgoing interface is up.
- B. There is no other route, to the same destination, with a higher distance.
- C. The next-hop IP address belongs to one of the outgoing interface subnets.
- D. The link health monitor (if configured) is up.
- E. The next-hop IP address is up.
Answer: A,C,D
Explanation:
A configured static route only goes to routing table from routing database when all the following are met :
The outgoing interface is up
There is no other matching route with a lower distance
The link health monitor (if configured) is successful
The next-hop IP address belongs to one of the outgoing interface subnets
NEW QUESTION 35
View the IPS exit log, and then answer the question below.
# diagnose test application ipsmonitor 3
ipsengine exit log"
pid = 93 (cfg), duration = 5605322 (s) at Wed Apr19 09:57:26 2017
code = 11, reason: manual
What is the status of IPS on this FortiGate?
- A. IPS engine memory consumption has exceeded the model-specific predefined value.
- B. IPS daemon experienced a crash.
- C. There are communication problems between theIPS engine and the management database.
- D. All IPS-related features have been disabled in FortiGate's configuration.
Answer: D
Explanation:
Explanation
The command diagnose test application ipsmonitor includes many options that are useful for troubleshooting purposes.Option 3 displays the log entries generated every time an IPS engine process stopped. There are various reasons why these logs are generated:Manual: Because of the configuration, IPS no longer needs to run (that is, all IPS-releated features have been disabled)
NEW QUESTION 36
View the exhibit, which contains the output of a diagnose command, and then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. FortiGate used 209.222.147.3 as the initial server to validate its contract.
- B. FortiGate will probe 121.111.236.179 every fifteen minutes for a response.
- C. Servers with a negative TZ value are experiencing a service outage.
- D. Servers with the D flag are considered to be down.
Answer: A,B
Explanation:
Explanation
A - because flag is Failed so fortigate will check if server is available every 15 minD-state is I , contact to validate contract info
NEW QUESTION 37
View the exhibit, which contains the output of a real-time debug, and then answer the question below.
Which of the following statements is true regarding this output? (Choose two.)
- A. This web request was inspected using the root web filter profile.
- B. The requested URL belongs to category ID 52.
- C. FortiGate found the requested URL in its local cache.
- D. The web request was allowed by FortiGate.
Answer: B,C
NEW QUESTION 38
View the exhibit, which contains the output of diagnose sys session stat, and then answer the question below.
Which statements are correct regarding the output shown? (Choose two.)
- A. There are 0 ephemeral sessions.
- B. All the sessions in the session table are TCP sessions.
- C. There are 166 TCP sessions waiting to complete the three-way handshake.
- D. No sessions have been deleted because of memory pages exhaustion.
Answer: A,D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40578
NEW QUESTION 39
View the exhibit, which contains a partial output of an IKE real-time debug, and then answer the question below.
Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?
- A. auto-discovery-receiver
- B. auto-discovery-shortcut
- C. auto-discovery-sender
- D. auto-discovery-forwarder
Answer: D
NEW QUESTION 40
Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script onFortiManager, but failed to apply any changes to the managed device after being executed.
Why did the TCL script fail to make any changes to the managed device?
- A. Changes in an interface configuration can only be done by CLI script.
- B. The TCL command run_cmd has not been created.
- C. Incomplete commands are ignored in TCL scripts.
- D. The TCLscript must start with #include <>.
Answer: B
NEW QUESTION 41
Viewthe exhibit, which contains the output of a real-time debug, and then answer the question below.
Which of the following statements is true regarding this output? (Choose two.)
- A. This web request was inspected using the root web filter profile.
- B. The requested URL belongs to category ID 52.
- C. FortiGate found the requested URL in its local cache.
- D. The web request was allowed by FortiGate.
Answer: B,C
NEW QUESTION 42
Examine thefollowing partial outputs from two routing debug commands; then answer the question below:
Why the default route using port2 is not displayed in the output of the second command?
- A. It is disabled in the FortiGate configuration.
- B. It hasa higher priority than the default route using port1.
- C. It has a higher distance than the default route using port1.
- D. It has a lower priority than the default route using port1.
Answer: C
Explanation:
Explanation
http://kb.fortinet.com/kb/viewContent.do?externalId=FD32103
NEW QUESTION 43
View the exhibit, which contains the output of a diagnose command, and the answer the question below.
Which statements are true regarding the Weight value?
- A. Its initial value is calculated based on the round trip delay (RTT).
- B. It determines which FortiGuard server is used for license validation.
- C. Its initial value is statically set to 10.
- D. Its value is incremented with each packet lost.
Answer: D
NEW QUESTION 44
Examine the IPsec configuration shown in the exhibit; then answer the question below.
An administrator wants to monitor the VPN by enabling theIKE real time debug using these commands:
diagnose vpn ike log-filter src-addr4 10.0.10.1
diagnose debug application ike -1
diagnose debug enable
The VPN is currently up, there is no traffic crossing the tunnel and DPD packets are beinginterchanged between both IPsec gateways. However, the IKE real time debug does NOT show any output. Why isn't there any output?
- A. The IKE real time debug shows error messages only. If it does not provide any output, it indicates that the tunnel is operating normally.
- B. The log-filter setting is set incorrectly. The VPN's traffic does not match this filter.
- C. The IKE real time debug shows the phase 1 negotiation only. For information after that, the administrator must use the IPsec real time debug instead: diagnose debug application ipsec -1.
- D. The IKE real time shows the phases 1 and 2 negotiations only. It does not show any more output once the tunnel is up.
Answer: B
NEW QUESTION 45
Which real time debug should an administrator enable to troubleshoot RADIUS authentication problems?
- A. Diagnose authd console -log enable.
- B. Diagnose debug application radius -1.
- C. Diagnose debug application fnbamd -1.
- D. Diagnose radius console -log enable.
Answer: C
NEW QUESTION 46
View the exhibit, which contains the output of a debug command, and then answer the question below.
Which of the following statements about the exhibit are true? (Choose two.)
- A. In the network on port4, two OSPF routers are down.
- B. The local FortiGate has been elected as the OSPF backup designated router.
- C. Port4 is connected to the OSPF backbone area.
- D. The local FortiGate's OSPF router ID is 0.0.0.4
Answer: C,D
NEW QUESTION 47
An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.
Why didn't the script make any changes to the managed device?
- A. Incomplete commands are ignored in CLI scripts.
- B. CLI scripts will add objects only if they are referenced by policies.
- C. Commands that start with the # sign are not executed.
- D. Static routes can only be added using TCL scripts.
Answer: C
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/2400_Scripts/1000_Script%20samples/0200_CLI%20scripts+.htm#Error_Messages A sequence of FortiGate CLI commands, as you would type them at the command line. A comment line starts with the number sign (#). A comment line will not be executed.
NEW QUESTION 48
View the following FortiGate configuration.
All traffic to theInternet currently egresses from port1. The exhibit shows partial session information for Internet traffic from a user on the internal network:
If the priority on route ID 1 were changed from 5 to 20, what would happen to traffic matching that user's session?
- A. The session would remain in the session table, and its traffic would still egress from port1.
- B. The session would be deleted, so the client would need to start a new session.
- C. The session would remain in the session table, but its traffic would now egress from both port1 and port2.
- D. The session would remain in thesession table, and its traffic would start to egress from port2.
Answer: A
Explanation:
Explanation
http://kb.fortinet.com/kb/documentLink.do?externalID=FD40943
NEW QUESTION 49
Which of the following statements are correct regardingapplication layer test commands? (Choose two.)
- A. Some of them display statistics and configuration information about a feature or process.
- B. Some of them can beused to restart an application.
- C. They are used to filter real-time debugs.
- D. They display real-time application debugs.
Answer: A,B
Explanation:
Explanation
Application layer test commands don't display info in real time, but they do show statistics and configuration info about a feature or process. You can also use some of these commands to restart a pr ocess or execute a change in its operation.
NEW QUESTION 50
......
Ace Fortinet NSE7_EFW-6.4 Certification with Actual Questions Jun 02, 2022 Updated: https://www.braindumpsit.com/NSE7_EFW-6.4_real-exam.html