The New C-S43-2022 2024 Updated Verified Study Guides & Best Courses
Authentic C-S43-2022 Exam Dumps PDF - 2024 Updated
SAP C-S43-2022 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 47
A Task List contains two operations:
*Every 3 MON: pump inspection
*Every 24 MON. pump replacement
When replacing the pump, the operation pump inspection will be ignored. How can you achieve this?
- A. Create a task list hierarchy
- B. Assign different hierarchy levels
- C. Create a cycle set sequence
- D. Set the lead float
Answer: C
Explanation:
Explanation
A cycle set sequence is a feature that allows you to combine several multiple counter plan cycles in a set and determine the order in which the system considers the cycle sets for scheduling. A multiple counter plan is a maintenance plan that is based on one or more performance-based or time-based cycles1.
In this case, you can create a cycle set sequence with two cycles:
Cycle 1: Every 3 MON: pump inspection
Cycle 2: Every 24 MON: pump replacement
You can assign a different maintenance item and task list to each cycle, and specify the repetition factor for each cycle. The repetition factor determines how many times the cycle is repeated before the next cycle in the sequence is considered. For example, if you set the repetition factor of cycle 1 to 8, the system will schedule the pump inspection 8 times before scheduling the pump replacement.
By creating a cycle set sequence, you can achieve the requirement that when replacing the pump, the operation pump inspection will be ignored. The system will only generate a call object for the maintenance item that is assigned to the current cycle set. Therefore, when the pump replacement is due, the system will not generate a call object for the pump inspection.
The other options are incorrect because:
Assign different hierarchy levels: Hierarchy levels are used to structure the task list operations into groups and subgroups. They do not affect the scheduling of the task list operations.
Set the lead float: Lead float is a time buffer that is added to the start or finish date of a task list operation. It does not affect the scheduling of the task list operations.
Create a task list hierarchy: A task list hierarchy is a structure that contains several task lists that are linked together by a superior task list. It does not affect the scheduling of the task list operations.
References: 1: Cycle Set Sequence in Multiple Counter Plan - SAP Help Portal
NEW QUESTION # 48
Where can you see the results of the material availability check for maintenance orders? Note: There are 2 correct answers to this question
- A. In the report Material: Where-Used List
- B. In the material reservation list in inventory management
- C. In the list editing (single-level) for maintenance orders
- D. Within a maintenance order
Answer: A,D
NEW QUESTION # 49
You need to create a new functional location. Which actions can you perform with the SAP Fiori app "Create Technical Object"? Note: There are 3 correct answers to this question
- A. Assign documents
- B. Change a reference location.
- C. Assign a subordinate piece of equipment.
- D. Edit classification data and characteristics.
- E. Create a task list for functional location
Answer: A,B,D
NEW QUESTION # 50
Which requirements have to be fulfilled so that an Inspection Checklist with Inspection Lots is generated? Note: There are 2 correct answers to this question.
- A. An Inspection Plan and a technical object must be assigned to the same class.
- B. A checklist type must be assigned to the maintenance order header.
- C. A PM task list with inspection point type must be assigned to the maintenance order
- D. An object list must have been generated manually or automatically.
Answer: A,C
NEW QUESTION # 51
Which functions are available in the Resource Scheduling for Maintenance Planners app? Note: There are 2 correct answers to this question.
- A. Monitor maintenance order operations due in the next 4 weeks
- B. Dispatch maintenance order operations
- C. Schedule and dispatch maintenance operations by shifts.
- D. Print job papers from a maintenance order.
Answer: A,B
NEW QUESTION # 52
How is Phase-based Maintenance Processing activated in the SAP system? Note: There are 2 correct answers to this question
- A. Phase-based maintenance is always active in all S/4HANA 2021 editions and above
- B. Through Best Practices scope items 4HH and 4HI.
- C. By installing the corresponding enhancement pack and activating the related business function
- D. By manually activating the corresponding Business Feature in case Best Practices are not used.
Answer: A,B
NEW QUESTION # 53
What happens if you change the primary key of a functional location?
- A. Changing the superior functional location via alternative labeling is not possible.
- B. The user must define a new labelling system for the new primary key.
- C. The user must decide whether the functional location is assigned to a new superior functional location.
- D. The functional location cannot be assigned to a new superior functional location when the new label is entered.
Answer: C
Explanation:
Explanation
Changing the primary key of a functional location means changing the label of the functional location. The label is the unique identifier of the functional location and it consists of a structure indicator and a functional location identification. The structure indicator defines the allowed characters and the hierarchy levels of the functional location structure. The functional location identification is the actual name of the functional location. When you change the primary key of a functional location, you can either change the structure indicator or the functional location identification, or both. If you change the structure indicator, you need to adjust the functional location identification accordingly. If you change the functional location identification, you need to decide whether the functional location is assigned to a new superior functional location or not. A superior functional location is the functional location that is directly above the current functional location in the hierarchy. For example, if you have a functional location FL-01-02-03, where FL is the structure indicator,
01 is the first level, 02 is the second level, and 03 is the third level, you can change the primary key to FL-01-02-04, which means changing the functional location identification within the same level. In this case, you need to decide whether the functional location is still assigned to FL-01-02 as the superior functional location or not. Alternatively, you canchange the primary key to FL-01-03, which means changing the functional location identification to a different level. In this case, you need to decide whether the functional location is still assigned to FL-01 as the superior functional location or not.
The user does not need to define a new labelling system for the new primary key, as the labelling system is defined by the structure indicator, which can be reused for different functional locations. Therefore, answer A is incorrect. The functional location can be assigned to a new superior functional location when the new label is entered, as long as the new label is consistent with the structure indicator and the hierarchy rules. Therefore, answer B is also incorrect. Changing the superior functional location via alternative labeling is possible, as alternative labeling allows you to assign different labels to the same functional location. Therefore, answer C is also incorrect. References: Explaining Technical Asset Structures - SAP Learning, Organizational Elements and Structures | SAP Help Portal, and SAP Alternative Labeling of Functional Locations.
NEW QUESTION # 54
Which activities can the technician perform with the Report and Repair Malfunction SAPUI5 app? Note:
There are 2 correct answers to this question
- A. Complete
*Close Report - B. Release
*Print - C. Schedule
*Dispatch - D. Release
*Start Work
Answer: A,D
Explanation:
The Report and Repair Malfunction SAPUI5 app is a Fiori app that allows the technician to easily report that a technical object has a malfunction, plan the required repair work, as well as document and confirm the maintenance work when it's done1. With this app, the technician can perform the following activities:
C: Complete and Close Report. This is true because the technician can provide information about the malfunction and the job, confirm the job, and close the malfunction report. The technician can also attach pictures or descriptions of the damage, as well as a URL to provide further information about the technical object or the damage1.
D: Release and Start Work. This is true because the technician can release the malfunction report and start working on the job assigned to them. The technician can also view the details of the technical object, the history of recent repair work, the required spare parts, and the work centers involved1.
The technician cannot perform the following activities with this app:
A: Schedule and Dispatch. This is false because these activities are performed by the planner or the dispatcher, not the technician. The planner or the dispatcher can use the Resource Scheduling app to schedule and dispatch the maintenance orders and operations2.
B: Release and Print. This is false because the technician can only release the malfunction report, not print it. The technician can use the Repair Malfunctions - My Job List app to view the list of all work items assigned to them and their current status, but not to print them1. References
1: Report and Repair Malfunction 2: Resource Scheduling
NEW QUESTION # 55
Which of the following is a prerequisite for external refurbishment?
- A. Select the material group for externally refurbished materials.
- B. Define the order type for external refurbishment.
- C. Activate the subcontracting indicator in an external activity.
- D. Assign an external work center to a maintenance order operation
Answer: C
NEW QUESTION # 56
You require stock material to carry out maintenance tasks. What do you have to consider regarding material planning in the maintenance order? Note: There are 2 correct answers to this question?
- A. A goods issue can be entered for planned and unplanned material
- B. For stock material you always need a reservation
- C. Material can be assigned at the order header level.
- D. The pick list for materials can be printed before order release.
Answer: A,B
NEW QUESTION # 57
You want to have several plan dates calculated in a maintenance plan.Which scheduling parameter do you use?
- A. Call horizon
- B. Scheduling period
- C. Scheduling indicator
- D. End Date for Scheduling
Answer: B
Explanation:
Explanation
To have several plan dates calculated in a maintenance plan, you use the scheduling period parameter. The scheduling period defines the time interval for which the system calculates the planned dates for the maintenance plan. For example, if you enter 12 months as the scheduling period, the system calculates the planned dates for the next 12 months from the current date. Youcan also specify the end date for scheduling, which is the last date for which the system calculates the planned dates. The scheduling indicator determines how the system calculates the planned dates based on the cycle, the shift factor, and the tolerance. The call horizon defines the percentage of the cycle that must be expired before the system generates a call object (such as a maintenance order or notification) for the planned date.
References: 1: Scheduling Maintenance Plans - SAP Learning 2: Maintenance Plan Scheduling Parameters - SAP Online Help
NEW QUESTION # 58
Which views can you assign to an equipment category via a view profile? Note: There are 2 correct answers to this question?
- A. Manufacturer data
- B. Serial data
- C. Configuration
- D. Warranty
Answer: A,D
Explanation:
Explanation
An equipment category defines the technical characteristics of an equipment and the views that are available for it. A view profile is a set of views that can be assigned to an equipment category. The views that can be assigned to an equipment category via a view profile are:
Basic data
Classification
Location
Organization
Partner
Status
Structure
Warranty
Manufacturer data
Measurement document
History
Permits
Documents
User fields
Serial data
Configuration
Object links
Time-dependent data
Linear data
Geographical data
Maintenance plan
Maintenance item
Maintenance task list
Maintenance order
Maintenance notification
Service order
Service notification
Service contract
Service confirmation
Service quotation
Service request
Service plan
Service item
Service task list
Service product
Service product allocation
Service product structure
Service product location
Service product partner
Service product status
Service product classification
Service product documents
Service product permits
Service product user fields
Service product serial data
Service product configuration
Service product object links
Service product time-dependent data
Service product linear data
Service product geographical data
Among these views, the ones that match the options given in the question are Warranty and Manufacturer data.
Therefore, the correct answers are A and D.
References:
SAP Help Portal - Equipment Category
SAP Help Portal - View Profile
NEW QUESTION # 59
What is a characteristic of the SAP Fiori tile group? Note: There are 2 correct answers to thisquestion?
- A. It is assigned via a portal role.
- B. It provides only HTML5-based apps
- C. It is based on an SAP Fiori tile catalog.
- D. It can be assigned directly to the user via personalization
Answer: C,D
Explanation:
Explanation
A SAP Fiori tile group is a subset of apps from one or more catalogs that are displayed on the user's entry page of the SAP Fiori launchpad1. A tile group has the following characteristics:
It is based on an SAP Fiori tile catalog. A catalog is a logical group of apps or tiles that defines the set of all tiles that users can use to personalize the home page2. A group can contain apps from different catalogs, depending on the user's role and authorization1.
It can be assigned directly to the user via personalization. The user can personalize the entry page by adding or removing apps to pre-delivered groups or self-defined groups2. The user can also reorder the groups and tiles according to their preference1.
It does not provide only HTML5-based apps. A tile group can contain apps that are based on different technologies, such as SAPUI5, Web Dynpro ABAP, or SAP GUI transactions1.
It is not assigned via a portal role. A tile group is assigned to the user's role via the SAP Role Maintenance transaction PFCG2. A portal role is a different concept that is used in the SAP Enterprise Portal to define the access rights and content for portal users.
References: Configure the Fiori Launchpad Tiles using Catalogs & Groups, Setup of Catalogs, Groups, and Roles in the SAP Fiori Launchpad, [Portal Roles]
NEW QUESTION # 60
Which capabilities does SAP Service and Asset Manager (formerly SAP Asset Manager) provide? Note: There are 3 correct answers to this question
- A. SAP Service and Asset Manager can run on smart watches.
- B. SAP Service and Asset Manager provides single sign-on functionality.
- C. SAP Service and Asset Manager is available only for the iOS platform.
- D. SAP Service and Asset Manager can be used offline.
- E. SAP Service and Asset Manager is available for SAP S/4HANA and SAP ERP
Answer: B,D,E
NEW QUESTION # 61
Which objects can you assign to a Maintenance Service Order Item? Note: There are 2 correct answers to this question.
- A. Service Work Center
- B. DIP Profile
- C. Service Product
- D. Service Master Record
Answer: C,D
Explanation:
Explanation
A maintenance service order item can be assigned to a service product and a service master record. A service product is a material that represents a service that is offered or performed by the service provider. A service master record is a master data object that contains information about the service, such as description, unit of measure, price, and validity period. A service product and a service master record are linked by the service material number. A maintenance service order item can also be assigned to a service master record directly, without a service product. This is useful when the service is not part of the service provider's catalog, but is requested by the customer on an ad-hoc basis. A DIP profile and a service work center are not objects that can be assigned to a maintenance service order item. A DIP profile is a configuration object that defines how the costs and revenues of a service order item are determined and transferred to billing. A service work center is amaster data object that represents a person, a group of persons, or a technical resource that performs a service activity. A DIP profile and a service work center are assigned to the maintenance service order header, not to the item level. References:
Maintenance Service Order
Service Product
[Service Master
Record](https://help.sap.com/docs/SAP_S4HANA_ON-PREMISE/3757ad8f98484812b58947bb8e6a2663
NEW QUESTION # 62
Which scheduling parameters are used in a multiple-counter plan? Note: There are 2 correct answers to this question.
- A. Scheduling period
- B. Factory calendar
- C. Scheduling indicator
- D. Start date
Answer: A,C
Explanation:
Explanation
A multiple-counter plan is a maintenance plan that contains multiple maintenance cycles based on different counters. The scheduling parameters are used to define the scheduling rules for each maintenance cycle in the plan. The scheduling parameters are:
Scheduling period: This is the interval between two maintenance calls, expressed in the unit of the counter. For example, if the counter is measured in kilometers, the scheduling period could be 10,000 km. This means that a maintenance call is due every 10,000 km. This parameter is mandatory for each maintenance cycle in a multiple-counter plan1.
Scheduling indicator: This is the indicator that determines how the system calculates the next due date for the maintenance call, based on the counter reading and the scheduling period. There are three possible values for the scheduling indicator1:
Fixed: The system calculates the next due date by adding the scheduling period to the counter reading at the time of the last maintenance call. For example, if the last maintenance call was at
20,000 km and the scheduling period is 10,000 km, the next due date is 30,000 km.
Shifted: The system calculates the next due date by adding the scheduling period to the counter reading at the time of the actual maintenance execution. For example, if the actual maintenance execution was at 21,500 km and the scheduling period is 10,000 km, the next due date is 31,500 km.
Proportional: The system calculates the next due date by adding the scheduling period to the counter reading at the time of the planned maintenance execution. For example, if the planned maintenance execution was at 20,500 km and the scheduling period is 10,000 km, the next due date is 30,500 km.
Start date: This is the date when the first maintenance call is due, based on the counter reading and the scheduling period. This parameter is optional for each maintenance cycle in a multiple-counter plan1. If it is not specified, the system uses the current date as the start date.
Factory calendar: This is the calendar that defines the working days and holidays for the maintenance plan. This parameter is optional for each maintenance cycle in a multiple-counter plan1. If it is not specified, the system uses the factory calendar of the maintenance planning plant.
Therefore, option A (Scheduling period) and option C (Scheduling indicator) are correct, while option B (Start date) and option D (Factory calendar) are not mandatory for a multiple-counter plan.
References:
Multiple-Counter Plans
NEW QUESTION # 63
During the implementation project you need to define the organizational units relevant for Plant Maintenance. Which of the following objects can you directly assign to a maintenance plant? Note: There are 2 correct answers to this question
- A. Maintenance work center
- B. Maintenance planner group
- C. Storage location
- D. Organizational unit
Answer: A,C
NEW QUESTION # 64
Which activities can the technician perform with the Report and Repair Malfunction SAPUI5 app? Note: There are 2 correct answers to this question
- A. Release
* Start Work - B. Complete
* Close Report - C. Schedule
* Dispatch - D. Release
* Print
Answer: A,B
NEW QUESTION # 65
You want to display vehicle-specific data for a piece of equipment. How do you proceed?
- A. Assign a view profile to the combination of vehicle type and equipment category.
- B. Set the relevant flags in Customizing activity "Define Additional Business Views for Equipment Categories".
- C. Assign a view profile to an equipment category for fleet equipment.
- D. Assign a view profile to the combination of equipment category and vehicle class.
Answer: A
NEW QUESTION # 66
......
Get Prepared for Your C-S43-2022 Exam With Actual 82 Questions: https://www.braindumpsit.com/C-S43-2022_real-exam.html
Valid C-S43-2022 Test Answers Full-length Practice Certification Exams: https://drive.google.com/open?id=1f-Lr6cAuL-Lu20y6mnMsl02aojymIDDY