Try Before You Buy

Download a free sample of any of our exam questions and answers

  • 24/7 customer support, Secure shopping site
  • Free One year updates to match real exam scenarios
  • If you failed your exam after buying our products we will refund the full amount back to you.

Updated Aug-2021 Exam Engine or PDF for the CompTIA 220-1001 test to help you quickly prepare for the CompTIA exam! [Q255-Q280]

Share

Updated Aug-2021 Test Engine or PDF for the CompTIA 220-1001 test to help you quickly prepare for the CompTIA exam!

Full 220-1001 Practice Test and 710 unique questions with explanations waiting just for you, get it now!

NEW QUESTION 255
A user is unable to print to a printer on the network. When a technician runs the pingcommand, the technician receives a response. However, the hostname is not correct when the technician runs the nslookup command. Which of the following BEST describes the issue the technician is seeing?

  • A. A missing subnet mask
  • B. An IP address conflict
  • C. A DHCP timeout
  • D. An incorrect default gateway

Answer: B

 

NEW QUESTION 256
A user receives a replacement modem/router combination device from an ISP and plugs it in. A laptop connected to the router via WiFi receives an address in the 192.168.0.x range but is unable to access the Internet. Which of the following would MOST likely resolve the problem?

  • A. Update the password on the wireless connection.
  • B. Change the laptop from a wireless to a wired connection.
  • C. Register the new cable modem MAC address with the ISP.
  • D. Upgrade the network drivers on the laptop.

Answer: B

 

NEW QUESTION 257
A technician receives a call from a user regarding a message fat has appeared on several office computers The message states the computers have been encrypted and require payment to recover the data First, the technician instructs the user to disconnect the computers from the network The technician then troubleshoots the issue by identifying the problem and developing a theory about what happened Which of the following steps of the troubleshooting process should the technician complete NEXT?

  • A. Document findings, actions and outcomes
  • B. Verify full system functionality and implement preventive measures
  • C. Test the theory to determine the cause
  • D. Establish a plan of action to resolve the problem

Answer: C

 

NEW QUESTION 258
Which of the following is an IP address that is assigned to a network device based on its MAC address?

  • A. Static
  • B. Reservation
  • C. Dynamic
  • D. Link local

Answer: B

 

NEW QUESTION 259
A user purchases a wireless printer and sets it up in an office. The user installs all necessary software for the printer on the computer and connects the printer to the guest wireless network. However, when the user attempts to print to the printer, nothing happens.
Which of the following will resolve the issue?

  • A. Ensure the user's computer is set to DHCP.
  • B. Configure the printer to use the Internet printing protocol.
  • C. Set up the user's computer to act as a print server.
  • D. Connect the printer to the company wireless network.

Answer: D

 

NEW QUESTION 260
A user recently purchased a new smartphone, and the phone's performance has since degraded. A technician examines the phone and determines its performance has decreased due to a lack of available storage space. Which of the following devices will the technician MOST likely install in the phone to increase the storage?

  • A. xD
  • B. MiniSD
  • C. MicroS D
  • D. SD
  • E. CompactFlash

Answer: C

 

NEW QUESTION 261
A technician is trying to identify the reason why a user, who has a static IP address, is unable to browse the Internet. the technician runs the ipconfig command and gets the following:

The technician then runs the tracert 8,8,8,8 command and gets the following:

Which of the following is the MOST likely issues he user is having?

  • A. There is a problem with a network router
  • B. The wrong subnet mask is configured
  • C. The user has an APIPA IP address configured
  • D. There is a problem with a network switch.

Answer: B

 

NEW QUESTION 262
A user reports paper output from a printer has toner that is not sticking to the page. The output smears when it is touched. A technician notes the appropriate paper is being used. The toner appears to be low but is a supported OEM cartridge. Which of the following would MOST likely fix this issue?

  • A. Replace the fuser.
  • B. Replace the developer roll.
  • C. Replace the drum.
  • D. Find and remove any jammed paper.
  • E. Replace the toner.

Answer: B

 

NEW QUESTION 263
A user deploys a new access point with the following settings:

The user's computer has the following specifications:

The user does not see the wireless network when trying to connect. Which of the following is the MOST likely cause of the issue?

  • A. The wireless adapter is incompatible with this configuration.
  • B. The antenna being used is directional and not suitable for roaming connectivity.
  • C. The computer does not support WPA2 encryption.
  • D. The operating system is incompatible with the wireless configuration.
  • E. The channel width is too wide for non-802.11ac equipment.
  • F. The access point should be configured to ad-hoc mode.

Answer: A

 

NEW QUESTION 264
Which of the following cable types transmits in an analog format?

  • A. USB-C
  • B. OVI-D
  • C. HDMI
  • D. VGA

Answer: D

 

NEW QUESTION 265
A developer has configured a new web application on a workstation using client-side virtualization. Despite working locally on the developer's PC, other users on the network are not able to access the application.
Which of the following network configurations should the virtual machine be configured for to allow other users to access the application?

  • A. Bridged networking
  • B. Internal networking
  • C. NAT networking
  • D. Private networking

Answer: A

 

NEW QUESTION 266
A user is unable to print to a printer on the network. When a technician runs the ping command, the technician receives a response. However, the hostname is correct when the technician runs the nslookup command.
Which of the following BEST describes the issue the technician is seeing?

  • A. An IP address conflict
  • B. A DHCP timeout
  • C. An incorrect default gateway
  • D. A missing subnet mask

Answer: D

 

NEW QUESTION 267
You need to configure your mobile device to send and receive electronic messages from your company.
You must use the company's WLAN as all e-mail services are on default non-secure ports.
The company's WLAN is broadcasting across the company for easier access.
Users must authenticate to the server with the same credentials in order to send and receive email.
Authentication should be enforced in the settings of the mobile device using the following parameters:
* Username: [email protected]
* Password: P@$$w0rd
* Outgoing server: mail.techies.com
* Incoming server: pop3.techies.com
* Company SSID: Techies
* Security Key: CA:FE:33:71:00
INSTRUCTIONS:
Update the mobile device's parameters to fit the criteria and support the strongest encryption available.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.







Answer:

Explanation:
See explanation below.
Explanation
For the WiFi setup, do the following:
1. Enable 802.11 b/g Radio
2. Choose the Techies SSID, enter the CA:FE:33:71:00 security Key.
3. Choose the "Same as Incoming Server" option below.

For Email setup, choose the following:

 

NEW QUESTION 268
Megan, the CEO, is unable to connect to the company's network on her company-issued enterprise tablet when in the office, however, it works perfectly from home. All the corporate laptops are connected to the wireless network without issue. She has asked you for assistance in getting the device online.
INSTRUCTIONS
Review the network diagrams and device configurations to determine the cause of the problem and resolve any discovered issues.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.




Answer:

Explanation:
Click on Tablet Office 3

Click on 802.11 and Select a

Click on SSID and select CORP

At Wireless Security Mode, Click on Security Mode

Select the WPA

Megan needs to connect to the CORP SSID, using 2.4GHZ. The selected security method chose should be WPA2, and the password should be set to Corpsecure1.

 

NEW QUESTION 269
A technician is troubleshooting what appears to be a RAM issue on a PC.
Which of the following symptoms would indicate if this is a RAM issue?

  • A. Continuous reboots
  • B. Wrong BIOS time
  • C. POST code beeps
  • D. Distended capacitors

Answer: C

 

NEW QUESTION 270
Drag each mobile technology to the description of its use. Some answers will not be used.

Answer:

Explanation:

Explanation
1 - IR
2 - Bluetooth
3 - NFC
4 - Tethering

 

NEW QUESTION 271
Which of the following is the minimum category cable that supports 1000Mbps speed?

  • A. Cat 6
  • B. Cat 6e
  • C. Cat 3
  • D. Cat Se

Answer: D

 

NEW QUESTION 272
A user is accessing webmail and needs to encrypt the contents of the email message and attachments prior to sending.
Which of the following should be configured to accomplish this task?

  • A. VPN settings
  • B. SSL settings
  • C. S/MIME settings
  • D. TLS settings

Answer: C

 

NEW QUESTION 273
A network technician is troubleshooting Internet connectivity issues on a customer's wired network. All PCs at the site are able to connect to local resources but not the Internet. The technician suspects the customer's router may have failed during a recent power outage. To verify this assumption, the technician should connect a laptop to:

  • A. the network switch.
  • B. the cable modem.
  • C. an AP's guest network.
  • D. a phone hotspot.

Answer: C

 

NEW QUESTION 274
A user received a new workstation but is unable to print successfully to the shared network printer. Other users are able to print without issues. Some recent OS updates were applied to the workstation, and all other services are working fine. The technician checks the printer's properties and notices it is configured for LPT1. Which of the following should be performed NEXT to troubleshoot the issue?

  • A. Configure a new printer port.
  • B. Clean the print heads.
  • C. Update the printer description name.
  • D. Restart the print spooler.

Answer: D

 

NEW QUESTION 275
A technician is setting up a laptop and projector for a presentation. When plugging in the projector, it mirrors the desktop screen from the laptop, but everything appears distorted and compressed.
Which of the following should the technician do to correct the appearance of the image on the projector?

  • A. Change the scaling options.
  • B. Update the laptop graphics driver.
  • C. Replace the video cable.
  • D. Utilize a USB VGA graphics adapter.
  • E. Adjust the keystone settings on the projector.
  • F. Change the desktop resolution.

Answer: F

 

NEW QUESTION 276
A network administrator is deploying virtualization software to several desktop computers Some of the Installations fall because a processor function Is disabled In the computer's BIOS. Which of the following functions should be turned on for the installation to succeed?

  • A. VT-x
  • B. VNC
  • C. Trusted Platform Module
  • D. Hyperthreading

Answer: A

 

NEW QUESTION 277
Drag each mobile technology to the description of its use. Some answers will not be used.

Answer:

Explanation:

 

NEW QUESTION 278
A customer has two 8GB sticks of 2400-speed DDR4 installed in slots 1 and 2 of a computer and wants to add more RAM. The customer purchases two additional 4GB sticks of 3200-speed DDR4 and installs then in slots 3 and 4. While installing the RAM into the board, the user notices the board has "quad channel" etched near the RAM slots.
Which of the following can be said about the user's channel configuration after upgrading the RAM?

  • A. The computer is utilizing one channel.
  • B. The computer is utilizing three channels.
  • C. The computer is utilizing four channels.
  • D. The computer is utilizing two channels.

Answer: B

 

NEW QUESTION 279
A technician manually configured the wireless connection on the Chief Information Officer's (ClO's) new laptop so it can communicate with the network at the office The CIO now is having trouble connecting to a guest WiFi hotspot While the device has a gateway address and says it is connected, the CIO cannot access company email Which of the following would BEST resolve the issue?

  • A. Restart the wireless connection to obtain a self-assigned APIPA address
  • B. Move the ClO's laptop closer to the access point to obtain a better RF signal
  • C. Assign a different IP address to the device in conflict with the ClO's laptop
  • D. Set the network connection to use DHCP instead of a static address
  • E. Change the network's SSID to a mobile hotspot to access company email

Answer: A

 

NEW QUESTION 280
......

Full 220-1001 Practice Test and 710 unique questions with explanations waiting just for you, get it now: https://www.braindumpsit.com/220-1001_real-exam.html