Updated Feb-2023 Premium Desktop-Specialist Exam Engine pdf - Download Free Updated 150 Questions

Authentic Desktop-Specialist Dumps With 100% Passing Rate Practice Tests Dumps

NEW QUESTION 73
What does the following icon do in Tableau?
Larger image

• A. Create a Worksheet
• B. Create a Story
• C. Create a Dashboard
• D. Create a Story and Dashboard both

Answer: C

Explanation:
Explanation
The icon shown is used to add a new Dashboard! From the official documentation:

 

NEW QUESTION 74
Which of the following can you use to create a Histogram?

• A. 2 dimensions
• B. 1 dimension
• C. 2 measures
• D. 1 measure

Answer: D

Explanation:
Explanation
A histogram is a chart that displays the shape of a distribution. A histogram looks like a bar chart but groups values for a continuous measure into ranges, or bins.
The basic building blocks for a histogram are as follows:


Demo :

 

NEW QUESTION 75
Which of the following are valid reasons to use a Tableau Data Extract (.tde) over Live Connections?

• A. Fast to create
• B. Help improve performance
• C. To support additional functionality such as count distinct
• D. To have access to the freshest possible data at all times

Answer: A,B,C

Explanation:
Explanation
From the official documentation, the following are the major advantages of using Tableau Data Extracts:

From Tableau 2020.2 onwards, .hyper is the recommended way since it is faster than .tde!

 

NEW QUESTION 76
Are animations enabled by default in Tableau?

• A. Yes
• B. No

Answer: B

Explanation:
Explanation
No, by default, animations are not enabled in Tableau.
We can animate visualizations to better highlight changing patterns in your data, reveal spikes and outliers, and see how data points cluster and separate.
Animations visually transition between filter, sort, and zoom settings, different pages, and changes to filter, parameter, and set actions. As visualizations animate in response to these changes, viewers can more clearly see how data differs, helping them make better informed decisions.
When you author animations, you can choose between two different styles: simultaneous or sequential. Here are examples of each type.
1) Simultaneous animations
The default simultaneous animations are faster and work well when showing value changes in simpler charts and dashboards.

2) Sequential animations
Sequential animations take more time but make complex changes clearer by presenting them step-by-step.

To Animate visualizations in a workbook:
1) Choose Format > Animations.
2) If you want to animate every sheet, under Workbook Default, click On. Then do the following:
For Duration, choose a preset, or specify a custom duration of up to 10 seconds.
For Style, choose Simultaneous to play all animations at once or Sequential to fade out marks, move and sort them, and then fade them in.
3) To override workbook defaults for a particular sheet, change the settings under Selected Sheet.

 

NEW QUESTION 77
Using the Time Series table, create a chart that shows the percent difference in Average Inventory on Hand for each Assortment by year and quarter.
How many quarters did the Electronics Assortment show a negative percent difference in the Average Inventory On Hand?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

Explanation:
Explanation
If you chose 2, then you were very close but probably didn't plot the actual Percent Difference on your view. ( One of the marks is just over the line).
* Firstly, Drop the Week ID onto the column shelf, and convert it to continuous since we need both Year and Quarter as mentioned in the question.
* 2) Next, Drop assortment to filters shelf so that we can focus on Electronics!

3) This should be your view now. Click on the Show Mark Labels icon as shown:
The final view is as follows, with 3 points below 0 ( i.e negative )

 

NEW QUESTION 78
You can create _______________ for members in a dimension so that their labels appear differently in the view.

• A. copies
• B. parameters
• C. duplicates
• D. aliases

Answer: D

Explanation:
Explanation
You can create aliases (alternate names) for members in a dimension so that their labels appear differently in the view.
Aliases can be created for the members of discrete dimensions only. They cannot be created for continuous dimensions, dates, or measures.
To create an alias:

1) In the Data pane, right-click a dimension and select Aliases.
2) In the Edit Aliases dialog box, under Value (Alias), select a member and enter a new name.

* To submit your changes: In Tableau Desktop, click OK.
On Tableau Server or Tableau Online, click the X icon in the top-right corner of the dialog box.
When you add the field to the view, the alias names appear as labels in the view. For example:

 

NEW QUESTION 79
Which of the following chart type makes use of 'binned' data?

• A. Histogram
• B. Bullet chart
• C. Gantt Chart
• D. Treemaps

Answer: A

Explanation:
Explanation
A histogram is a chart that displays the shape of a distribution. A histogram looks like a bar chart but groups values for a continuous measure into ranges, or bins.

 

NEW QUESTION 80
When using the manage metadata option, we can create custom names for columns where _____________ is the original name of the column whereas _____________ is the custom name we created in Tableau.

• A. Remote Field Name, Field Name
• B. Local Name, Actual Name
• C. Local Field, Global Field
• D. Column Name, Actual Name

Answer: A

Explanation:
Explanation
Using the Sample superstore as a reference, click on the manage metadata icon as follows:

We can rename a particular column name to make it easier to remember and use in Tableau. Let's change Order ID to oID as shown:

Now, we'll see oID when using this data source in Tableau. This WILL NOT affect the original data source.
The remote field name let's us see what the name of the column is in the ORIGINAL Data source.

 

NEW QUESTION 81
The row and column shelves contain ___________________

• A. Grand Totals
• B. Pills
• C. Parameters
• D. Filters

Answer: B

Explanation:
Explanation
We can drag fields from the Data pane to create the structure for your visualizations.
The Columns shelf creates the columns of a table, while the Rows shelf creates the rows of a table. You can place any number of fields on these shelves.
These FIELDS are also referred to as PILLS. See below:

 

NEW QUESTION 82
How can you format numbers in Tableau as currency?

• A. Right-click a dimension in the view and select Format. Then in the Format pane, click the Numbers drop-down menu.
• B. Right-click on the Sheet name and select Format. Then in the Format pane, click the Numbers drop-down menu.
• C. Right-click on the data source used in the view and select Format. Then in the Format pane, click the Numbers drop-down menu.
• D. Right-click a measure or axis in the view and select Format. Then in the Format pane, click the Numbers drop-down menu.

Answer: D

Explanation:
Explanation
According to the official Tableau documentation:

 

NEW QUESTION 83
What does the box in a box plot represent?

• A. The interquartile range
• B. Maximum value of the data
• C. Minimum value of the data
• D. The median of the middle half of the data points

Answer: A

Explanation:
Explanation
In a box and whisker plot:
1) The ends of the box are the upper and lower quartiles, so the box spans the interquartile range
2) The median is marked by a vertical line inside the box
3) The whiskers are the two lines outside the box that extend to the highest and lowest observations.

 

NEW QUESTION 84
How do you identify a continuous field in Tableau?

• A. It is identified by a green pill in a visualization
• B. It is identified by a blue pill in the visualization
• C. It is preceded by a '=#' symbol in the data window
• D. It is preceded by a 'Abc' symbol in the data window

Answer: C

Explanation:
Explanation
When you connect to a new data source, Tableau assigns each field in the data source as dimension or measure in the Data pane, depending on the type of data the field contains. You use these fields to build views of your data.

 

NEW QUESTION 85
The View Data window displays as much of the data as possible by default, up to _______________ rows.

• A. 15,000
• B. 5,000
• C. 10,000
• D. 20,000

Answer: C

Explanation:
Explanation
The View Data window displays as much of the data as possible by default, up to 10,000 rows. This can be increased though, if you wish to.

Read more: https://help.tableau.com/current/pro/desktop/en-gb/inspectdata_viewdata.htm

 

NEW QUESTION 86
Data blending simulates a traditional _________________ Join

• A. Right
• B. Left
• C. Inner
• D. Full Outer

Answer: B

Explanation:
Explanation
Data blending simulates a traditional left join. The main difference between the two is when the aggregation is performed. A join combines the data and then aggregates. A blend aggregates and then combines the data.
From the official website:

 

NEW QUESTION 87
_______________ enables us to create workbooks and views, dashboards, and data sources in Tableau Desktop, and then publish this content to our own server.

• A. Tableau Server
• B. Tableau myServer
• C. Tableau Public
• D. Tableau Prep

Answer: B

Explanation:
Explanation
Tableau SERVER enables us to create workbooks and views, dashboards, and data sources in Tableau Desktop, and then publish this content to our own server.
Moreover, as a Tableau Server administrator you will control who has access to server content to help protect sensitive data. Administrators can set user permissions on projects, workbooks, views, and data sources.

 

NEW QUESTION 88
The default path for all supporting files, data sources, icons, logs etc is in ______________________

• A. Documents -> My Tableau Repository
• B. Documents -> Tableau
• C. Documents -> Tableau Files
• D. Downloads -> Tableau Support Files

Answer: A

Explanation:
Explanation
By default, all of the above mentioned are stored in Documents -> My Tableau Repository

 

NEW QUESTION 89
True or False: Tableau can create worksheet-specific filters

• A. False
• B. True

Answer: B

Explanation:
Explanation
Yes, it is possible to create worksheet-specific filters in Tableau.
When you add a filter to a worksheet, by default it applies to the current worksheet. Sometimes, however, you might want to apply the filter to other worksheets in the workbook.
Then, you can select specific worksheets to apply the filter to or apply it globally to all worksheets that use the same data source or related data sources.

 

NEW QUESTION 90
How can you change the default Tableau repository location?

• A. By Moving the repository location manually to wherever we want
• B. By clicking on File -> Repository Location and choosing a new location
• C. By clicking on Help -> Change Repository Location
• D. By clicking on Window -> Repository Location

Answer: A

Explanation:
Explanation
According to the official Tableau documentation:

 

NEW QUESTION 91
Given a map, which of the following fields can be placed in Size,Shape,Detail,Color

• A. Region, Country, Profit, State
• B. Profit, State, Number of Records, Sales
• C. Sales, State, Country, Profit
• D. Longitude, Country, State, Sales

Answer: C

Explanation:
Explanation
Since Sales is a measure, it can easily be depicted via size.
To drill down and change the level of detail, Country is the correct choice since it will contain STATE. We can then depict the various states by different shapes such as circle, square etc.
Finally, the Profit can be depicted via a color! Eg - Red for poor and green for excellent profits!

 

NEW QUESTION 92
Which of the following 2 columns CANNOT be deleted in Tableau?

• A. Number of Records
• B. Measure Names
• C. Calculated Fields
• D. Measure Values

Answer: B,D

Explanation:
Explanation
Measure names and values CANNOT be deleted in Tableau like other columns can. These are auto-generated.
Calculated Fields, and Number of records can both be deleted.

 

NEW QUESTION 93
......

Verified Pass Desktop-Specialist Exam in First Attempt Guaranteed: https://www.braindumpsit.com/Desktop-Specialist_real-exam.html

Tableau Desktop-Specialist Real Exam Questions Guaranteed Updated Dump from BraindumpsIT: https://drive.google.com/open?id=1bO4hn-KtN5l0xZhQMG1GuWPj2WCBseoj