2023 NSE5_FAZ-7.2 exam torrent NSE5_FAZ-7.2 Study Guide

Easily pass NSE5_FAZ-7.2 Exam with our Dumps & PDF Test Engine

To take the NSE5_FAZ-7.2 exam, candidates must have a strong understanding of network security concepts and experience using FortiAnalyzer. NSE5_FAZ-7.2 exam consists of 35 multiple-choice questions and has a time limit of 60 minutes. Candidates who pass the exam will earn the Fortinet NSE 5 - FortiAnalyzer 7.2 Analyst certification, which is valid for two years.

 

NEW QUESTION # 48
How are logs forwarded when FortiAnalyzer is using aggregation mode?

• A. Logs and content files are forwarded as they are received.
• B. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
• C. Logs are forwarded as they are received.
• D. Logs and content files are stored and uploaded at a scheduled time.

Answer: D

Explanation:
https://www.fortinetguru.com/2020/07/log-forwarding-fortianalyzer-fortios-6-2-3/
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/420493/modes

NEW QUESTION # 49
Which statement describes online logs on FortiAnalyzer?

• A. Logs that reached a specific size and were rolled over
• B. Logs that are saved to disk, compressed, and available in FortiView
• C. Logs that can be used to create reports
• D. Logs that can be viewed using Log Browse

Answer: D

NEW QUESTION # 50
An administrator has configured the following settings:
config system global
set log-checksum md5-auth
end
What is the significance of executing this command?

• A. This command records passwords in log files and encrypts them.
• B. This command records the log file MD5 hash value.
• C. This command encrypts log transfer between FortiAnalyzer and other devices.
• D. This command records the log file MD5 hash value and authentication code.

Answer: D

NEW QUESTION # 51
Why must you wait for several minutes before you run a playbook that you just created?

• A. FortiAnalyzer needs that time to parse the new playbook.
• B. FortiAnalyzer needs that time to ensure there are no other playbooks running.
• C. FortiAnalyzer needs that time to back up the current playbooks.
• D. FortiAnalyzer needs that time to debug the new playbook.

Answer: A

NEW QUESTION # 52
What statements are true regarding the "store and upload" log transfer option between FortiAnalyzer and FortiGate? (Choose three.)

• A. Both secure communications methods (SSL and IPsec) allow the store and upload option.
• B. All FortiGates can send logs to FortiAnalyzer using the store and upload option.
• C. Only FortiGate models with hard disks can send logs to FortiAnalyzer using the store and upload option.
• D. Disk logging is enabled on the FortiGate through the CLI only.
• E. Disk logging is enabled by default on the FortiGate.

Answer: A,C,D

NEW QUESTION # 53
Refer to the exhibit.

What does the data point at 12:20 indicate?

• A. The sqlplugind service is caught up with new logs.
• B. FortiAnalyzer is using its cache to avoid dropping logs.
• C. The performance of FortiAnalyzer is below the baseline.
• D. The log insert lag time is increasing.

Answer: D

NEW QUESTION # 54
Which two statements are correct regarding the export and import of playbooks? (Choose two.)

• A. You can import a playbook even if there is another one with the same name in the destination.
• B. You can export only one playbook at a time.
• C. A playbook that was disabled when it was exported, will be disabled when it is imported.
• D. Playbooks can be exported and imported only within the same FortiAnaryzer.

Answer: A,C

Explanation:
If the imported playbook has the same name as an existing one, FortiAnalyzer will create a new name that includes a timestamp to avoid conflicts.
Playbooks are imported with the same status they had (enabled or disabled) when they were exported.
Playbooks set to run automatically should be exported while they are disabled to avoid unintended runs on the destination.

NEW QUESTION # 55
After generating a report, you notice the information you were expecting to see is not included in it. What are two possible reasons for this scenario? (Choose two.)

• A. The logs were overwritten by the data retention policy.
• B. The time frame selected in the report is wrong.
• C. The logfiled service has not indexed all the expected logs.
• D. You enabled auto-cache with extended log filtering.

Answer: A,C

NEW QUESTION # 56
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.)

• A. Logs will be presented in both ADOMs immediately after the move.
• B. Archived logs will be moved to ADOM1 from the root ADOM automatically.
• C. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
• D. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.

Answer: B,D

NEW QUESTION # 57
FortiAnalyzer centralizes which functions? (Choose three)

• A. Network analysis
• B. Security log analysis / forensics
• C. Vulnerability assessment
• D. Content archiving / data mining
• E. Graphical reporting

Answer: B,D,E

NEW QUESTION # 58
What are two effects of enabling auto-cache in a FortiAnalyzer report? (Choose two.)

• A. When new logs are received, the hard-cache data is updated automatically.
• B. The size of newly generated reports is optimized to conserve disk space.
• C. The generation time for reports is decreased.
• D. FortiAnalyzer local cache is used to store generated reports.

Answer: A,C

NEW QUESTION # 59
How can you configure FortiAnalyzer to permit administrator logins from only specific locations?

• A. Use administrative profiles
• B. Use static routes
• C. Use secure protocols
• D. Use trusted hosts

Answer: D

Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/186508/trusted-hosts

NEW QUESTION # 60
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data?

• A. Take no action if the RAID level supports a failed disk
• B. Shut down FortiAnalyzer and replace the disk
• C. Replace the disk and rebuild the RAID manually
• D. Hot swap the disk

Answer: B

Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD46446#:~:text=On%20FortiAnalyzer%2FFortiManager%20devices%20that,to%20exchanging%20the%20hard%20disk.
If a hard disk on a FortiAnalyzer unit fails, it must be replaced. On FortiAnalyzer devices that support hardware RAID, the hard disk can be replaced while the unit is still running - known as hot swapping. On FortiAnalyzer units with software RAID, the device must be shutdown prior to exchanging the hard disk.

NEW QUESTION # 61
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?

• A. Log upload
• B. Log fetching
• C. Log forwarding an aggregation mode
• D. Indicators of Compromise

Answer: B

Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/651442/fetcher-management

NEW QUESTION # 62
Which two statements are true regarding log fetching on FortiAnalyzer? (Choose two.)

• A. Log fetching can be done only on two FortiAnalyzer devices that are running the same firmware version.
• B. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with the same FortiAnalyzer devices at the other end.
• C. Log fetching allows the administrator to run queries and reports against historical data by retrieving archived logs from one FortiAnalyzer device and sending them to another FortiAnalyzer device.
• D. Log fetching allows the administrator to fetch analytics logs from another FortiAnalyzer for redundancy.

Answer: A,C

Explanation:
Reference:
Using FortiAnalyzer, you can enable log fetching. This allows FortiAnalyzer to fetch the archived logs of specified devices from another FortiAnalyzer, which you can then run queries or reports on for forensic analysis.
The FortiAnalyzer device that fetches logs operates as the fetch client, and the other FortiAnalyzer device that sends logs operates as the fetch server. Log fetching can happen only between two FortiAnalyzer devices, and both of them must be running the same firmware version. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with different FortiAnalyzer devices at the other end.
FortiAnalyzer_7.0_Study_Guide-Online pag. 168

NEW QUESTION # 63
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?

• A. Log collection
• B. Real-time forwarding
• C. Log correlation
• D. Host name resolution

Answer: C

NEW QUESTION # 64
Which statements are true of Administrative Domains (ADOMs) in FortiAnalyzer? (Choose two.)

• A. ADOMs constrain other administrator's access privileges to a subset of devices in the device list.
• B. Once enabled, the Device Manager, FortiView, Event Management, and Reports tab display per ADOM.
• C. ADOMs are enabled by default.
• D. All administrators can create ADOMs--not just the admin administrator.

Answer: A,B

NEW QUESTION # 65
You crested a playbook on FortiAnalyzer that uses a FortiOS connector
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stitch are available in the FortiOS connector?

• A. Fabric Connector event
• B. FortiAnalyzer Event Handler
• C. FortiOS Event Log
• D. Incoming webhook

Answer: D

Explanation:
"One possible scenario is shown on the slide:
1. Traffic flows through the FortiGate
2. FortiGate sends logs to FortiAnalyzer
3. FortiAnalyzer detects some suspicious traffic and generates an event
4. The event triggers the execution of a playbook in FortiAnalyzer, which sends a webhook call to FortiGate so that it runs an automation stitch
5. FortiGate runs the automation stitch with the corrective or preventive actions" FortiAnalyzer_7.0_Study_Guide-Online page 228 In order to see the actions related to the FOS connector, you must enable an automation rule using the Incoming Webhook Call trigger on the FortiGate side. FortiAnalyzer_7.0_Study Guide page no 233

NEW QUESTION # 66
How do you restrict an administrator's access to a subset of your organization's ADOMs?

• A. Assign the ADOMs to the administrator's account
• B. Assign the default Super_User administrator profile
• C. Configure trusted hosts
• D. Set the ADOM mode to Advanced

Answer: A

Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/717578/assigning-administrators-to-an-adom

NEW QUESTION # 67
On FortiAnalyzer, what is a wildcard administrator account?

• A. An account that validates against any user account on a FortiAuthenticator
• B. An account that requires two-factor authentication
• C. An account that permits access to members of an LDAP group
• D. An account that allows guest access with read-only privileges

Answer: C

Explanation:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/747268/configuring-wildcard-admin-accounts

NEW QUESTION # 68
For proper log correlation between the logging devices and FortiAnalyzer, FortiAnalyzer and all registered devices should:

• A. Use host name resolution
• B. Use DNS
• C. Use an NTP server
• D. Use real-time forwarding

Answer: C

NEW QUESTION # 69
In order for FortiAnalyzer to collect logs from a FortiGate device, what configuration is required? (Choose two.)

• A. FortiGate must be registered with FortiAnalyzer
• B. Remote logging must be enabled on FortiGate
• C. Log encryption must be enabled
• D. ADOMs must be enabled

Answer: A,B

Explanation:
Pg 70: "after you add and register a FortiGate device with the FortiAnalyzer unit, you must also ensure that the FortiGate device is configured to send logs to the FortiAnalyzer unit."
https://docs.fortinet.com/uploaded/files/4614/FortiAnalyzer-5.4.6-Administration%20Guide.pdf Pg 45: "ADOMs must be enabled to support the logging and reporting of NON-FORTIGATE devices, such as FortiCarrier, FortiClientEMS, FortiMail, FortiWeb, FortiCache, and FortiSandbox."

NEW QUESTION # 70
......

Fortinet NSE5_FAZ-7.2 certification is recognized worldwide as a leading credential for network security professionals. It is a valuable asset for those seeking to advance their careers in the field of network security, and it demonstrates a high level of expertise and proficiency with Fortinet's FortiAnalyzer platform. Fortinet NSE 5 - FortiAnalyzer 7.2 Analyst certification exam is rigorous and comprehensive, and it requires a significant amount of study and preparation to pass. However, the rewards of earning the certification are well worth the effort, as it can open up new career opportunities and increase earning potential for those who hold it.

 

NSE5_FAZ-7.2 PDF Pass Leader, NSE5_FAZ-7.2 Latest Real Test: https://www.braindumpsit.com/NSE5_FAZ-7.2_real-exam.html

Valid NSE5_FAZ-7.2 Test Answers & NSE5_FAZ-7.2 Exam PDF: https://drive.google.com/open?id=1nlgAZ3Uh3yUzArlWS5BcfsF4F89MtNXt