[Sep-2021] Updated Manufacturing Cloud 1z0-1075-20 Exam Questions BUNDLE PACK

Master The Oracle Content 1z0-1075-20 EXAM DUMPS WITH GUARANTEED SUCCESS!

NEW QUESTION 30
Your customer is a light assembly manufacturing company that doesn't require shop floor control. A manufacturing engineer wants to generate a work definition automatically for some items, and wants to eliminate the explicit maintenance of work definitions.
Which three steps must be completed and verified in the Work Definition area?

• A. Select a resource that is to be used in automatic work definition by enabling the attribute Default for automatic work definition.
• B. Ensure there is only one default standard operation at a given point in time.
• C. Ensure the predefined work definition name ORA_MAIN name is active.
• D. Ensure the item is a standard item with a secondary item structure.
• E. Select a standard operation that is to be used in automatic work definition by enabling the attribute Default for automatic work definition.

Answer: C,D,E

 

NEW QUESTION 31
Work order costs are computed based on material and resource transactions reported and the cost method of the product. In a manufacturing plant, the production operator has completed a work order WO-001 ensuring proper materials and resource transactions. The materials are costed and resources are defined with rates.
A cost accountant has created cost accounting distributions. Upon reviewing the accounting distributions of the work order WO-001, resources charged to the work order are missing.
Identify the Concurrent Request that needs to be submitted to transfer resource charges to cost accounting.

• A. Create accounting
• B. Transfer Transactions from Production to Costing
• C. Transfer Transactions from Inventory to Costing
• D. Transfer Costs to Cost Management

Answer: B

 

NEW QUESTION 32
Your customer has the following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Goods as one of its component.
Identify the way to establish the relationship between Pallet and Engine Work Definitions.

• A. Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.
• B. The two Work Definitions can be tied through Project or Seiban numbers.
• C. The Work Definition versions can be used to tie the Work Orders.
• D. Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.

Answer: C

 

NEW QUESTION 33
You are reviewing the production status of your manufacturing plant shop floor as a production supervisor.
Your production manager wants a report on a work order status which is reserved against a particular customer. The final assembly of the work order is serialized.
Which option shows the steps to complete the task using the mobile application?

• A. Select the infotile Customer to open the work order details page> Click Actions and select the E-mail icon> Select required work orders>Select the e-mail client, enter the recipient's e-mail, and click Send.
• B. Search the work order by customer name to open the work order details page> Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.
• C. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page> Select required work orders> Click Social icon (OSN) > Select recipient, and click Share.
• D. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page > Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.

Answer: D

 

NEW QUESTION 34
A Work Center created a month ago is no longer in use now. You want to remove the Work Center; however, the system is no allowing you to delete it.
Identify three reasons for this.

• A. The work center is being referenced in the Work Area.
• B. The Work Center is being referenced in the Closed Work Order.
• C. There are resources associated with the Work Center.
• D. The work center is being references in the work definition operation.
• E. The Work Center is being referenced in the Open Work Order.

Answer: A,C,E

 

NEW QUESTION 35
Identify two reports that provide work order cost-related information to the costing user.

• A. Cost Accounting Dashboard
• B. WIP Balance by Plant
• C. Work order Operational Analysis
• D. Purchase Variance Summary

Answer: A,C

 

NEW QUESTION 36
Identify the two capabilities that the Application Development Framework Desktop Integration (ADFDI) framework provides for Work Definitions in Manufacturing Cloud.

• A. You can mass create and update work definitions and their operations, items, and resources.
• B. You can copy work definitions form one organization to another organization.
• C. You can mass create and update work definitions and their operations, items only and cannot add resources in work definitions.
• D. You can mass create and update work definitions and their operations only and cannot add items and resources in work definitions.

Answer: A,B

 

NEW QUESTION 37
Identify three types of Item Quantities displayed in the Work Order History tab.

• A. Total Quantity
• B. In Process Quantity
• C. Completed Quantity
• D. Scrapped Quantity
• E. Remaining Quantity

Answer: C,D,E

 

NEW QUESTION 38
An order entry specialist creates a Back-to-Back order for product item with an intention of fulfilling by in-house manufacturing. The fulfillment line is scheduled and Supply Chain Orchestration (SCO) has initiated creation of a Supply Order rather than Work Order.
Identify two options that can cause this situation.

• A. Sourcing rules for the product item are defined as Buy as well as Transfer.
• B. Sourcing rule for the product item is defined as Buy.
• C. Sourcing rule for the product item is defined as Make, but Work Definition is not defined.
• D. Sourcing rules for the product item are defined as Make as well as Transfer.

Answer: C,D

 

NEW QUESTION 39
A manufacturing plant works for two shifts of 8 hours each. The Manufacturing user wants a work center resource R1 of 4 units to be available during a nonworking time outside the regular shift on a particular day.
Identify the sequence of steps to create a resource exception in the Manage Work Center Resource Calendar page.

• A. Click Outside the existing Shift time on a Specific Date> Create Work Center page> Click the Resource Availability tab> Click Add icon> Select R1 from Resource Drop-down list> Enter 4 in Default Units Availability column.
• B. Click Inside the existing Shift time on a Specific Date>Create Work Center page>Click the Resource Availability tab>Click Add icon> Select R1 from Resource Drop-down list> Enter4 in Default Units Available.
• C. Click Inside the existing Shift time on a Specific Date> Action Menu> Select Create Resource exception> Populate Start and Duration Field> Resource Availability region> Populate 4 units in Default Availability column.
• D. Click Outside the existing Shift time on a Specific Date> Action Menu> Select Create Resource exception> Populate Start and Duration Field> Resource Availability and Overrides Region> Populate
  4 units in Availability Override column.

Answer: D

 

NEW QUESTION 40
Planning Central has collected manufacturing data for a Work Order WO-2045 (Make Item AS1000), where actual duration of work order is 2 days. Item AS1000 manufacturing lead time is 1.25 days.
A plan is run and the Work Order WO-2045 is rescheduled.
Identify the duration of the rescheduled Work Order WO- 2045.

• A. Rescheduled Work Order WO-2045 duration = 1.25 days
• B. Rescheduled Work Order WO-2045 duration = 3.25days
• C. Rescheduled Work Order WO-2045 duration = 0.75 days
• D. Rescheduled Work Order WO-2045 duration = 2 days

Answer: C

 

NEW QUESTION 41
Your customer has defined the work definitions. They have created and saved a new version for the work definition and want to edit that work definition.
Which two attributes cannot be updated using the Edit Work Definition Details action?

• A. State Date
• B. Costing Priority
• C. Version
• D. Production Priority

Answer: A,C

 

NEW QUESTION 42
During a Manufacturing Cloud implementation, the customer request to develop Oracle Transactional Business Intelligence reports that are not available out-of- the box.
Identify the tool that is available to the Report Developer in Manufacturing Cloud to develop the reports.

• A. Oracle Business Intelligence Application
• B. Oracle Business Intelligence Standard Edition
• C. Oracle Business Intelligence Enterprise Edition
• D. Oracle Business Intelligence Publisher

Answer: D

 

NEW QUESTION 43
Your customer plans to use Oracle Representational State Transfer (REST) API with Oracle Supply Chain Management Cloud (Oracle SCM Cloud) to support integration requirements.
Identify four REST resources and the corresponding HTTP action available with Manufacturing Cloud.

• A. Work Order Status GET method
• B. Work Order Status POST method
• C. Resource transaction POST method
• D. Resource transaction GET method
• E. Work Orders PATCH method
• F. Work Orders GET method

Answer: A,C,E,F

 

NEW QUESTION 44
Identify four parameters that are considered in the calculation of manufacturing lead time in Oracle Manufacturing Cloud.

• A. The shifts are defined in the plant calendar
• B. Resource calendar exceptions
• C. The lot size of the item
• D. Resource calendars of the work centers involved
• E. Plant calendar exceptions
• F. The primary work definition of the item

Answer: A,B,C,F

 

NEW QUESTION 45
As part of an implementation project, you have to perform setups related to a Manufacturing plant in Functional Setup Manager.
What must be set up first in order for you to configure the setup task called Manage Plant Parameters?

• A. The Manage Items Profile Options tasks
• B. The Supply Chain Orchestration Functional Area
• C. The Manufacturing Master Data Functional Area
• D. The Manage product and Child Value Sets task

Answer: C

 

NEW QUESTION 46
While creating an item in Product Information Management (PIM), the following two item templates are selected in sequence and applied.
1. Template: Finished Goods (WIP = No, Customer Ordered = Yes)
2. Template: Sub-assembly (WIP = Yes, Customer Ordered = No)
Identify the Item Attribute values in the application.

• A. WIP = No, Customer Ordered = Yes
• B. WIP = Yes, Customer Ordered = No
• C. WIP = Yes, Customer Ordered = Yes
• D. WIP = No, Customer Ordered = No

Answer: A

 

NEW QUESTION 47
Identify three requirements fulfilled by nonstandard work orders.

• A. Rescheduling
• B. Rework
• C. Repair
• D. Prototype

Answer: B,C,D

 

NEW QUESTION 48
......

Pass Oracle 1z0-1075-20 Exam – Experts Are Here To Help You: https://www.braindumpsit.com/1z0-1075-20_real-exam.html